Datasheet Texas Instruments LMH6583 — Ficha de datos

LMH6583
www.ti.com SNOSAP5E – APRIL 2006 – REVISED MARCH 2013 LMH6583 16x8 550 MHz Analog Crosspoint Switch, Gain of 2
Check for Samples: LMH6583 FEATURES DESCRIPTION The LMHв„ў family of products is joined by the
LMH6583, a high speed, non-blocking, analog,
crosspoint switch. The LMH6583 is designed for high
speed, DC coupled, analog signals like high
resolution video (UXGA and higher). The LMH6583
has 16 inputs and 8 outputs. The non-blocking
architecture allows an output to be connected to any
input, including an input that is already selected. With
fully buffered inputs the LMH6583 can be impedance
matched to nearly any source impedance. The
buffered outputs of the LMH6583 can drive up to two
back terminated video loads (75Ω load). The outputs
and inputs also feature high impedance inactive
states allowing high performance input and output
expansion for array sizes such as 16 x 16 or 32 x 8
by combining two devices. The LMH6583 is
controlled with a 4 pin serial interface. Both single
serial mode and addressed chain modes are
available. 1 23 16 Inputs and 8 Outputs
64-pin Exposed Pad HTQFP Package
– -3 dB Bandwidth (VOUT = 2 VPP, RL = 1 kΩ) …