Datasheet Texas Instruments SN65LVDS116DGG — Ficha de datos

SN65LVDS116 www.ti.com SLLS370D – SEPTEMBER 1999 – REVISED FEBRUARY 2005 16-PORT LVDS REPEATER
FEATURES One Receiver and Sixteen Line Drivers Meet
or Exceed the Requirements of ANSI
EIA/TIA-644 Standard
Typical Data Signaling Rates to 400 Mbps or
Clock Frequencies to 400 MHz
Enabling Logic Allows Separate Control of
Each Bank of Four Channels or 2-Bit
Selection of Any One of the Four Banks
Low-Voltage Differential Signaling With
Typical Output Voltage of 350 mV and a 100-Ω
Load
Electrically Compatible With LVDS, PECL,
LVPECL, LVTTL, LVCMOS, GTL, BTL, CTT,
SSTL, or HSTL Outputs With External
Termination Networks
Propagation Delay Times < 4.7 ns
Output Skew Is < 300 ps and Part-to-Part
Skew < 1.5 ns
Total Power Dissipation Typically 470 mW
With All Ports Enabled and at 200 MHz
Driver Outputs or Receiver Input Is High
Impedance When Disabled or With VCC < 1.5 …