Datasheet Texas Instruments SN74ABTH16245 — Ficha de datos

FabricanteTexas Instruments
SerieSN74ABTH16245
Datasheet Texas Instruments SN74ABTH16245

Transceptores de bus de 16 bits con salidas de 3 estados

Hojas de datos

16-Bit Bus Transceivers With 3-State Outputs datasheet
PDF, 770 Kb, Revisión: I, Archivo publicado: marzo 17, 1999
Extracto del documento

Precios

Estado

SN74ABTH16245DGGRSN74ABTH16245DGVRSN74ABTH16245DLSN74ABTH16245DLG4SN74ABTH16245DLR
Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)Activo (Recomendado para nuevos diseños)Activo (Recomendado para nuevos diseños)Activo (Recomendado para nuevos diseños)Activo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNoNoNoNoNo

Embalaje

SN74ABTH16245DGGRSN74ABTH16245DGVRSN74ABTH16245DLSN74ABTH16245DLG4SN74ABTH16245DLR
N12345
Pin4848484848
Package TypeDGGDGVDLDLDL
Industry STD TermTSSOPTVSOPSSOPSSOPSSOP
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-G
Package QTY2000200025251000
CarrierLARGE T&RLARGE T&RTUBETUBELARGE T&R
Device MarkingABTH16245AM245ABTH16245ABTH16245ABTH16245
Width (mm)6.14.47.497.497.49
Length (mm)12.59.715.8815.8815.88
Thickness (mm)1.151.052.592.592.59
Pitch (mm).5.4.635.635.635
Max Height (mm)1.21.22.792.792.79
Mechanical DataDescargarDescargarDescargarDescargarDescargar

Paramétricos

Parameters / ModelsSN74ABTH16245DGGR
SN74ABTH16245DGGR
SN74ABTH16245DGVR
SN74ABTH16245DGVR
SN74ABTH16245DL
SN74ABTH16245DL
SN74ABTH16245DLG4
SN74ABTH16245DLG4
SN74ABTH16245DLR
SN74ABTH16245DLR
Bits1616161616
F @ Nom Voltage(Max), Mhz150150150150150
ICC @ Nom Voltage(Max), mA0.0320.0320.0320.0320.032
Operating Temperature Range, C-40 to 85-40 to 85-40 to 85-40 to 85-40 to 85
Output Drive (IOL/IOH)(Max), mA-32/64-32/64-32/64-32/64-32/64
Package GroupTSSOPTVSOPSSOPSSOPSSOP
Package Size: mm2:W x L, PKG48TSSOP: 101 mm2: 8.1 x 12.5(TSSOP)48TVSOP: 62 mm2: 6.4 x 9.7(TVSOP)48SSOP: 164 mm2: 10.35 x 15.88(SSOP)48SSOP: 164 mm2: 10.35 x 15.88(SSOP)48SSOP: 164 mm2: 10.35 x 15.88(SSOP)
RatingCatalogCatalogCatalogCatalogCatalog
Schmitt TriggerNoNoNoNoNo
Technology FamilyABTABTABTABTABT
VCC(Max), V5.55.55.55.55.5
VCC(Min), V4.54.54.54.54.5
Voltage(Nom), V55555
tpd @ Nom Voltage(Max), ns4.14.14.14.14.1

Plan ecológico

SN74ABTH16245DGGRSN74ABTH16245DGVRSN74ABTH16245DLSN74ABTH16245DLG4SN74ABTH16245DLR
RoHSObedienteObedienteObedienteObedienteObediente

Notas de aplicación

  • Bus-Hold Circuit
    PDF, 418 Kb, Archivo publicado: feb 5, 2001
    When designing systems that include CMOS devices, designers must pay special attention to the operating condition in which all of the bus drivers are in an inactive, high-impedance condition (3-state). Unless special measures are taken, this condition can lead to undefined levels and, thus, to a significant increase in the device?s power dissipation. In extreme cases, this leads to oscillation of
  • Quad Flatpack No-Lead Logic Packages (Rev. D)
    PDF, 1.0 Mb, Revisión: D, Archivo publicado: feb 16, 2004
    Texas Instruments (TI) Quad Flatpack No-lead (QFN) 14/16/20-terminal Pb-free plastic packages meet dimensions specified in JEDEC standard MO-241 allow for board miniaturization and hold several advantages over traditional SOIC SSOP TSSOP and TVSOP packages. The packages are physically smaller have a smaller routing area improved thermal performance and improved electrical parasitics while
  • Advanced BiCMOS Technology (ABT) Logic Characterization Information (Rev. B)
    PDF, 528 Kb, Revisión: B, Archivo publicado: jun 1, 1997
    The purpose of this document is to assist the designers of high-performance digital logic systems in using the advanced BiCMOS technology (ABT) logic family. Detailed electrical characteristics of these bus-interface devices are provided and tables and graphs have been included to compare specific parameters of the ABT family with those of other logic families. In addition typical data is provide
  • Advanced BiCMOS Technology (ABT) Logic Enables Optimal System Design (Rev. A)
    PDF, 115 Kb, Revisión: A, Archivo publicado: marzo 1, 1997
    Advanced bus-interface logic (ABIL) products processed in submicron advanced BiCMOS technologies (ABT) address the specific end-equipment demands of workstations personal and portable computers and telecommunications markets. This document discusses ABIL as system bus interfaces the merits of ABT its I/O structure packaging and ABT products for end-equipment specific solutions.
  • Family of Curves Demonstrating Output Skews for Advanced BiCMOS Devices (Rev. A)
    PDF, 80 Kb, Revisión: A, Archivo publicado: dic 1, 1996
    This document shows the output skew for the ABT16254 ABT16952 and ABT16500A devices of the TI advanced BiCMOS (ABT) family. The data samples show which output skew is being examined where the data originates and how it is analyzed. Some errors present in the data are discussed. Skew curves at varying temperatures are given for the ABT16240 ABT16245 ABT16952 ABT16500A and ABT16249 devic
  • Understanding Advanced Bus-Interface Products Design Guide
    PDF, 253 Kb, Archivo publicado: mayo 1, 1996
  • Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices
    PDF, 209 Kb, Archivo publicado: mayo 10, 2002
    Many telecom and networking applications require that cards be inserted and extracted from a live backplane without interrupting data or damaging components. To achieve this interface terminals of the card must be electrically isolated from the bus system during insertion or extraction from the backplane. To facilitate this Texas Instruments provides bus-interface and logic devices with features

Linea modelo

Clasificación del fabricante

  • Semiconductors> Logic> Buffer/Driver/Transceiver> Standard Transceiver