Datasheet Linear Technology LTC6263IMS#TRPBF — Ficha de datos

Fabricante	Linear Technology
Serie	LTC6263
Numero de parte	LTC6263IMS#TRPBF

Amplificadores operacionales de E / S de riel a riel de 30 µm y 240 µA de potencia eficiente

Hojas de datos

Vista previa y descarga

PDF, 1.8 Mb, Idioma: en, Archivo subido: agosto 6, 2017, Páginas: 26
30MHz, 240µA Power Efficient Rail-to-Rail I/O Op Amps

Extracto del documento

Embalaje

Package	MS-10
Package Code	MS
Package Index	05-08-1661

Paramétricos

Number of Channels	4
Unity Gain BW	30 MHz

Av Min Stable	1 V/V
Avol	46 dB
Common Mode Rejection Ratio	100 dB
Cdiff	0.4 pF
Design Tools	LTspice File
Enoise Density	13 nV/rtHz
Export Control	no
Ibias	60 nA
Inoise	0.6 pA/rtHz
Ios	0.002 µA
Iout	40 mA
Isupply	0.245 mA
LF Enoise	1.25 µVPP
Operating Temperature Range	-40 to 85 °C
Over-the-Top	no
PSRR	95 dB
Rail-to-Rail	Both
Rail-to-Rail In	yes
Rail-to-Rail Out	yes
SR	7 V/µs
Shutdown	yes
Single Supply	yes
Ts (0.1%)	400 ns
Type	VFB
VinCM High (from V+)	-0.1 V
VinCM Low (from V-)	-0.1 V
Voh (from V+)	0.06 V
Vol (from V-)	0.035 V
Vos	0.05 mV
Vos TC	0.4 µV/C
Vs Max	5.25 V
Vs Min	1.8 V

Plan ecológico

RoHS

Obediente

Otras opciones

LTC6261 LTC6261 LTC6262 LTC6262

Notas de Diseño

Descargar
Low Power Op Amp: Low Power Filter, Headphone Driver Revisited &mdash DN1041
PDF, 393 Kb, Archivo publicado: abr 25, 2017
Extracto del documento
Low Power Op Amp: Low Power Filter, Headphone
DriverВ Revisited
Design Note 1041
by Aaron Schultz
Introduction
A new family of op amps features industry leading
speed versus supply current. The LTC6261/LTC6262/
LTC6263 family (single, dual, quad) provides 30MHz
at a low 240ВµA supply current, with 400ВµV maximum
offset voltage and rail-to-rail input and output. In
combination with 1.8V to 5.25V supply, these op
amps enable applications requiring uncompromised
performance with low power and low voltage.
Active Filters
This new set of op amps with high MHz-to-mA ratios
provides an opportunity to look at filter circuits in a
new light. The two filter examples discussed here
display performance previously unachievable with
such low power.
Second Order Bessel Filter
Ample bandwidth and low supply current enable
deployment of active filters in portable and other low
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered …
Descargar
Low Power Op Amp: Low Power Filter, Headphone Driver Revisited &mdash DN563
PDF, 240 Kb, Archivo publicado: abr 25, 2017
Extracto del documento
Low Power Op Amp: Low Power Filter, Headphone
DriverВ Revisited
Design Note 563
by Aaron Schultz
100mW delivered to reach 110dBSPL. With 32О©, the
RMS current is 56mA and voltage 1.8V; with 120О©,
29mA and 3.5V. Introduction
A new family of op amps features industry leading
speed versus supply current. The LTC6261/LTC6262/
LTC6263 family (single, dual, quad) provides 30MHz
at a low 240ВµA supply current, with 400ВµV maximum
offset voltage and rail-to-rail input and output. In
combination with 1.8V to 5.25V supply, these op
amps enable applications requiring uncompromised
performance with low power and low voltage. Given a 3.3V supply and the output of one LTC6261
amplifier, there may not be sufficient drive capability to yield 100mW. However, the combination of
two 180В° phased amplifiers is enough to provide
the necessary drive to reach upwards of 100mW
delivered power. Duplication of this bridge drive
circuit enables power to both left and right sides. Bridge-Tied Differential Output Amplifier
The low supply current at the bandwidth and noise
performance allows for excellent fidelity at a fraction
of the usual dissipation in portable audio equipment. …

Artículos

Descargar
Low Power Op Amps: Only 20µA for 1.3MHz, 240µA for 30MHz &mdash LT Journal
PDF, 618 Kb, Archivo publicado: jul 7, 2017
Extracto del documento
Low Power Op Amps: Only 20ВµA for 1.3MHz,
240ВµA for 30MHz
Aaron Schultz, Catherine Chang and Philip Karantzalis Our op amp family has expanded with industry-leading speed versus supply current.
For super low 20ВµA supply current, the LTC6258/LTC6259/LTC6260 (single, dual,
quad) provide 1.3MHz at a with 400ВµV maximum offset voltage and rail-to-rail
input and output. The still-low 240ВµA of the LTC6261/LTC6262/ LTC6263 (single,
dual, quad) provide 30MHz with 400ВµV maximum offset voltage and rail-to-rail
input and output. In combination with 1.8V to 5.25V supply, these op amps enable
applications requiring good performance with low power and low voltage.
LOW NOISE REFERENCE This circuit takes advantage of the ability
of the LTC6258 to drive large capacitive
loads. Use of a large output capacitor
bank attached to the LTC6258 enables
significant bypassing of follow-on circuits
that use the reference voltage. In total, 12 | July 2017 : LT Journal of Analog Innovation LT6656
IN OUT
GND OUT
LTC6258 CIN1
22ВµF 22ВµF 22ВµF FigureВ 1. Low noise reference the combination of LT6656 and LTC6258,
in this configuration, develops a reference
voltage with low noise, at low power, and
with appreciably large bypass capacitance.
Voltage spectral noise densities are shown …

Linea modelo

Serie: LTC6263 (4)

LTC6263HMS#PBF LTC6263HMS#TRPBF LTC6263IMS#PBF LTC6263IMS#TRPBF

Clasificación del fabricante

Signal Conditioning > Amplifiers > Operational Amplifiers (Op Amps) > Precision Amplifiers (Vos | Low Power Amplifiers (Is < 1mA/amp) | Rail-to-Rail Amplifiers
Space & Harsh Environment > Extended Temperature Plastic (H & MP) > Extended Temperature (H & MP) Amplifiers

Otros nombres:

LTC6263IMSTRPBF, LTC6263IMS TRPBF