Datasheet Linear Technology LT1466LCS8#TRPBF — Ficha de datos

Hojas de datos

Otras opciones

LT1467L LT1467L

Notas de Diseño

• Descargar
  Maximize Dynamic Range with the LT1466L Micropower Rail-to-Rail Op Amp &mdash DN171
  PDF, 77 Kb, Archivo publicado: enero 1, 1998
  Extracto del documento

  Maximize Dynamic Range with the LT1466L Micropower
  Rail-to-Rail Op Amp – Design Note 171
  William Jett
  Rail-to-rail amplifiers present an attractive solution for
  signal conditioning. For battery-powered or other low
  voltage circuitry, the entire supply voltage can be used
  by both the input and output signals, maximizing the
  system’s dynamic range. Circuits that require signal
  sensing near either supply are straightforward to implement using rail-to-rail amplifiers. The LT ®1466L dual
  and LT1467L quad combine rail-to-rail input and output
  operation with precision specifications. Requiring only
  75ОјA of supply current, the LT1466L/LT1467L feature
  a maximum offset of 390ОјV. Unlike other rail-to-rail
  amplifiers, the input offset voltage of 390μV maximum
  is guaranteed across the entire rail-to-rail input range,
  not just at half supply. The resulting common mode
  rejection of 83dB minimum is much better than that
  of other rail-to-rail amplifiers. A minimum open-loop
  gain of 400V/mV into a 10k load virtually eliminates
  all gain error.
  The following circuits demonstrate the LT1466L’s railto-rail performance.
  Variable Current Source
  The current source shown in Figure 1 provides a near …

Linea modelo

Clasificación del fabricante

• Signal Conditioning > Amplifiers > Operational Amplifiers (Op Amps) > Precision Amplifiers (Vos | Low Power Amplifiers (Is < 1mA/amp) | High Voltage Amplifiers (>12V) | Rail-to-Rail Amplifiers

Otros nombres:

LT1466LCS8TRPBF, LT1466LCS8 TRPBF