Datasheet Linear Technology LTC1564CG#PBF — Ficha de datos

Fabricante	Linear Technology
Serie	LTC1564
Numero de parte	LTC1564CG#PBF

Filtro de antialiasing controlado digitalmente de 10kHz a 150kHz y PGA de 4 bits

Hojas de datos

PDF, 187 Kb, Revisión: A, Archivo subido: agosto 6, 2017

Extracto del documento

Precios

Embalaje

Package	SSOP-16
Package Code	G
Package Index	05-08-1640 (G16)

Paramétricos

Av Min Stable	1 V/V
Number of Channels	1
Demo Boards	DC393A
Export Control	no
GBW	0.15 MHz
Gain	1 to 16 V/V
Gain Accuracy	1.4 %
Isupply	17 mA
Operating Temperature Range	0 to 70 °C
Over-the-Top	no
Rail-to-Rail In	yes
Rail-to-Rail Out	yes
Shutdown	no
Single Supply	yes
Type	PGA
Voh (from V+)	.35 V
Vol (from V-)	.35 V
Vos	3 mV
Vs Max	10.5 V
Vs Min	2.7 V

Plan ecológico

RoHS

Obediente

Notas de Diseño

Descargar
LTC1564: A Digitally Tuned Antialiasing / Reconstruction Filter Simplifies High Performance DSP Design &mdash DN276
PDF, 90 Kb, Archivo publicado: enero 2, 2002
Extracto del documento
LTC1564: A Digitally Tuned Antialiasing/Reconstruction Filter
Simplifies High Performance DSP Design вЂ“ Design Note 276
Max W. Houser and Philip Karantzalis
Introduction
Typically an analog antialiasing п¬Ѓlter is used to band-limit
wideband signals at the input of an analog-to-digital
converter. In addition, as the converterвЂ™s sampling
rate changes, an antialiasing п¬ЃlterвЂ™s passband should
increase or decrease accordingly. A frequency-tunable
analog п¬Ѓlter for a high resolution converter requires a
large number of expensive precision components. With
the LTCВ®1564, designers of data acquisition instruments
and digital signal processing (DSP) systems have a low
noise, continuous-time, вЂњbrick wallвЂќ lowpass п¬Ѓlter with
digital control of the corner frequency fC, (fC range 10kHz
to 150kHz in 10kHz steps). The LTC1564 also includes
a digitally programmable gain ampliп¬Ѓer (PGA, 1V/V to
16V/V in 1V/V steps). A simple, on-chip, latching digital
interface controls corner frequency and gain settings.
The LTC1564 is in a small 16-pin SSOP and operates
from a supply voltage of 2.7V to 10.5V total (single or
split supplies).
Filtering Performance and Operation …

Artículos

Descargar
Digitally Programmable Low Noise Filter/Gain Block Requires No External Parts &mdash LT Journal
PDF, 187 Kb, Archivo publicado: mayo 1, 2001
Extracto del documento
DESIGN FEATURES Digitally Programmable
Low Noise Filter/Gain Block
Requires No External Parts by Max W. Hauser Introduction
Designers of instruments and DSPbased systems now have at their
disposal a continuous-time, вЂњbrickwallвЂќ lowpass filter with digital control
of the cutoff frequency (10kHz to
150kHz in 10kHz steps). The LTC1564
also offers digitally programmable
gain of up to 24dB (implemented in a
noise-efficient way) for dynamic range
to 122dB (20 equivalent bits), and
operates from a supply voltage of This single-chip product
eliminates expensive,
precision analog circuitry
in applications demanding
sharp roll-off, high dynamic
range, amplification or
programmability.
2.7V to 10.5V total (single or split
supplies). No additional analog components or calculations are needed. A
simple, on-chip, latching digital
interface can store frequency and gain
settings or can be overridden to …

Linea modelo

Serie: LTC1564 (4)

LTC1564CG#PBF LTC1564CG#TRPBF LTC1564IG#PBF LTC1564IG#TRPBF

Clasificación del fabricante

Signal Conditioning > Amplifiers > Programmable Gain Amplifiers
Signal Conditioning > Filters > Lowpass Filters

Otros nombres:

LTC1564CGPBF, LTC1564CG PBF

Contactos