Datasheet Linear Technology LTC1062CSW#TRPBF — Ficha de datos

FabricanteLinear Technology
SerieLTC1062
Numero de parteLTC1062CSW#TRPBF

Filtro de paso bajo de quinto orden

Hojas de datos

LTC1062 - 5th Order Lowpass Filter
PDF, 201 Kb, Revisión: D, Archivo subido: agosto 10, 2017
Extracto del documento

Precios

Embalaje

PackageSW-16
Package CodeSW
Package Index05-08-1620 (SW16)

Paramétricos

Clock Tunableyes
Export Controlno
Filter Order5 order
Filters Per Package1
Fo Max20 kHz
Fo Min1 kHz
Fo/Fclk100:1
Isupply4.5 mA
Operating Temperature Range0 to 70 °C
PreconfiguredLowpass
Vs Max18 V
Vs Min4.75 V

Plan ecológico

RoHSObediente

Notas de aplicación

  • Application Considerations for an Instrumentation Lowpass Filter &mdash AN20
    PDF, 2.8 Mb, Archivo publicado: sept 1, 1986
    Discusses the principles of operation of the LTC1062 and helpful hints for its application. Various application circuits are explained in detail with focus on how to cascade two LTC1062s and how to obtain notches. Noise and distortion performance are fully illustrated.
    Extracto del documento
  • Unique Applications for the LTC1062 Lowpass Filter &mdash AN24
    PDF, 587 Kb, Archivo publicado: sept 1, 1987
    Highlights the LTC1062 as a lowpass filter in a phase lock loop. Describes how the loop's bandwidth can be increased and the VCO output jitter reduced when the LTC1062 is the loop filter. Compares it with a passive RC loop filter. Also discussed is the use of LTC1062 as simple bandpass and bandstop filter.
  • Bridge Circuits &mdash AN43
    PDF, 3.8 Mb, Archivo publicado: jun 1, 1990
    Subtitled "Marrying Gain and Balance," this note covers signal conditioning circuits for various types of bridges. Included are transducer bridges, AC bridges, Wien bridge oscillators, Schottky bridges, and others. Special attention is given to amplifier selection criteria. Appended sections cover strain gauge transducers, understanding distortion measurements, and historical perspectives on bridge readout mechanisms and Wein bridge oscillators.
    Extracto del documento
  • Instrumentation Applications for a Monolithic Oscillator: A Clock for All Reasons &mdash AN93
    PDF, 1.1 Mb, Archivo publicado: feb 1, 2003
    Instrumentation applications for a monolithic programmable oscillator are presented in this publication. Circuits include platinum and thermistor based thermometers, an isolated thermometer and three relative humidity signal conditioners. Bipolar and FET input chopper stabilized amplifiers with noise below 45nV (0.1Hz to 10Hz) are detailed. Two clock tunable sine wave generators with settable amplitude appear, as well as a tunable notch filter, an interval generator and an A to D converter. The oscillator's performance is contrasted against other approaches and its interval operation discussed.
    Extracto del documento

Notas de Diseño

  • Sampling of Signals for Digital Filtering and Gated Measurements &mdash DN2
    PDF, 377 Kb, Archivo publicado: oct 1, 1987
    Extracto del documento
  • Complex Data Acquisition System Uses Few Components &mdash DN24
    PDF, 84 Kb, Archivo publicado: jul 1, 1989
    Extracto del documento
  • DC Accurate Filter Eases PLL Design &mdash DN7
    PDF, 203 Kb, Archivo publicado: feb 1, 1988
    Extracto del documento
  • Chopper Amplifiers Complement a DC Accurate Low-Pass Filter &mdash DN9
    PDF, 369 Kb, Archivo publicado: marzo 1, 1988
    Extracto del documento

Linea modelo

Serie: LTC1062 (3)

Clasificación del fabricante

  • Signal Conditioning > Filters > Lowpass Filters

Otros nombres:

LTC1062CSWTRPBF, LTC1062CSW TRPBF