Datasheet Linear Technology LT1769CFE#TRPBF — Ficha de datos

Fabricante	Linear Technology
Serie	LT1769
Numero de parte	LT1769CFE#TRPBF

Cargador de batería de corriente constante / voltaje constante 2A con limitación de corriente de entrada

Hojas de datos

Vista previa y descarga

PDF, 243 Kb, Idioma: en, Archivo subido: oct 2, 2017, Páginas: 16
Constant-Current/Constant-Voltage 2A Battery Charger with Input Current Limiting

Extracto del documento

Embalaje

Package	TSSOP-20
Package Code	FE
Package Index	05-08-1663 (CB)

Paramétricos

Battery Chemistry	Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid
Charge Termination	Microcontroller
Demo Boards	DC243A,DC299A-D
Export Control	no
Float Voltage	Adj V
Internal Pass Element	yes
Max Charge Current	2 A
Number of Cells	1 to 4 (Li), 1 to 12 (Ni)
Operating Temperature Range	0 to 70 °C
Type of Charger	Switching
Vin Max	29 V
Vin Min	7 V

Plan ecológico

RoHS

Obediente

Notas de Diseño

Descargar
Li-Ion Charge Termination IC Interfaces with PWM Switchers &mdash DN242
PDF, 74 Kb, Archivo publicado: oct 2, 2001
Extracto del documento
Li-Ion Charge Termination IC Interfaces with PWM Switchers
Design Note 242
Fran Hoffart
Rechargeable lithium-ion batteries are rapidly becoming the battery of choice for many battery-powered
products. These products include notebook computers, PDAs, video camcorders, digital cameras, cellular
phones, portable test equipment and others. Compared
to other rechargeable power sources, Li-Ion batteries
have higher energy density for both weight and volume
and provide longer run time between charges. tery from overtemperature and overcurrent conditions.
In addition, battery packs may also contain back-toback MOSFET switches that disconnect the battery if
an overcurrent condition exists for either charge or
discharge, or if an overvoltage or undervoltage condition exists. Many of these precautions are needed
because lithium-ion cells are easily damaged by both
overcharge and overdischarge conditions. Charging Li-Ion batteries is a relatively simple process.
Apply a current-limited (at a 1C rate) constant voltage
(В±1% tolerance) for approximately three hours, then
stop charging. (C is a battery term used to indicate
the Ampere-hour capacity of a battery). A complete
charge cycle may also include precharge qualiп¬Ѓcation
for battery temperature and precharge qualiп¬Ѓcation for
deeply discharged batteries. LTВ®1510 Battery Charger IC
The LT1510 is a high efп¬Ѓciency switching regulator
power IC designed speciп¬Ѓcally for battery charging …

Linea modelo

Serie: LT1769 (8)

LT1769CFE#PBF LT1769CFE#TRPBF LT1769CGN#PBF LT1769CGN#TRPBF LT1769IFE#PBF LT1769IFE#TRPBF LT1769IGN#PBF LT1769IGN#TRPBF

Clasificación del fabricante

Power Management > Battery Management > Battery Charger IC > Switching Battery Chargers

Otros nombres:

LT1769CFETRPBF, LT1769CFE TRPBF