Datasheet Linear Technology LT3598EUF#PBF — Ficha de datos

Fabricante	Linear Technology
Serie	LT3598
Numero de parte	LT3598EUF#PBF

Controlador LED de 6 cuerdas de 30 mA con ± 1.5% de coincidencia de corriente

Hojas de datos

PDF, 412 Kb, Revisión: B, Archivo subido: oct 4, 2017

Extracto del documento

Embalaje

Package	4x4 QFN-24
Package Code	UF
Package Index	05-08-1697

Paramétricos

Architecture	Independently Controlled Individual Current Sinks
Demo Boards	DC1285A
Design Tools	LTspice File
Dimming	3000:1 PWM, 10:1 Analog
Export Control	no
Features	True Color PWM Dimming, Output Disconnect, Open LED Detection, Resistor Set Frequency
Frequency	2500 kHz
Isupply	3.5 mA
Max Number of LEDs	6 x 10
Monolithic	yes
Number of Outputs	6
Operating Temperature Range	0 to 85 °C
Switch Current	0.33 A
Synchronous	no
Topology	Boost, Sepic, LED Driver
Vin Max	30 V
Vin Min	3.2 V
Vout Max	44 V

Plan ecológico

RoHS

Obediente

Notas de Diseño

Descargar
Reduce the Cost and Complexity of Medium LCD LED Backlights with a Single Inductor LED Driver for 60 LEDs &mdash DN462
PDF, 95 Kb, Archivo publicado: marzo 4, 2009
Extracto del documento
Reduce the Cost and Complexity of Medium LCD LED
Backlights with a Single Inductor LED Driver for 60 LEDs
Design Note 462
Daniel Chen
Introduction
One inductor, one IC, one string of LEDs. This is the
conventional way to build a boost LED driver for LCD
display backlights. Although this is a perfectly acceptable solution for small LCD displays that only require a
few strings, in larger displays the number of control ICs
and inductors multiplies quickly, as do the expenses and
PCB real estate requirements. This is a major hurdle in
the race to replace CCFLs with robust, spectrally superior
LEDs in medium sized, bright displays.
A better driver is needed to bring the cost and complexity of LED backlights in line with CCFLs. The LT3598
answers the call by driving six strings of ten LEDs at up
to 30mA per string. It also has a built-in power switch
to save space and design time. Efп¬Ѓciency is optimized
via an adaptive feedback loop that monitors all LED pin
voltages to provide an output voltage just high enough
to light all LED strings. The LED current is regulated even
when VIN is greater than VOUT . The LED current can be
derated based on programmed LED temperature through
an NTC resistor divider or by programming die junction …

Linea modelo

Serie: LT3598 (8)

LT3598EFE#PBF LT3598EFE#TRPBF LT3598EUF#PBF LT3598EUF#TRPBF LT3598IFE#PBF LT3598IFE#TRPBF LT3598IUF#PBF LT3598IUF#TRPBF

Clasificación del fabricante

Power Management > LED Driver ICs > Step-Up (Boost) LED Drivers

Otros nombres:

LT3598EUFPBF, LT3598EUF PBF

Contactos