Datasheet Analog Devices AD524AR-16 — Ficha de datos

Precision
Instrumentation Amplifier
AD524
FEATURES FUNCTIONAL BLOCK DIAGRAM
– INPUT 1
G = 10 13
G = 100 12
G = 1000 11 PROTECTION AD524 4.44kΩ
404Ω
40Ω Vb RG1 16 20kΩ 20kΩ 20kΩ 20kΩ SENSE OUTPUT RG2 3 + INPUT 2 20kΩ 20kΩ REFERENCE
00500-001 Low noise: 0.3 μV p-p at 0.1 Hz to 10 Hz
Low nonlinearity: 0.003% (G = 1)
High CMRR: 120 dB (G = 1000)
Low offset voltage: 50 μV
Low offset voltage drift: 0.5 μV/°C
Gain bandwidth product: 25 MHz
Pin programmable gains of 1, 10, 100, 1000
Input protection, power-on/power-off
No external components required
Internally compensated
MIL-STD-883B and chips available
16-lead ceramic DIP and SOIC packages and 20-terminal
leadless chip carrier available …

REVISIONS
LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Add case outline 2. Add input voltage test. Add footnote 3/. Editorial changes
throughout. 90-03-30 M. POELKING B Change boilerplate to add one-part part numbers.
Add table IIB for delta limits. -rrp 97-12-08 R. MONNIN C Add radiation hardened assurance requirements. -lgt 99-03-01 R. MONNIN D Replaced reference to MIL-STD-973 with reference to MIL-PRF-38535.
Drawing updated to reflect current requirements. -gt 04-08-06 R. MONNIN E Add a new footnote under paragraph 1.5 and Table I. -ro 05-08-09 R. MONNIN F Update drawing to reflect current requirements. Changes to 1.5. Deleted
unused group E boilerplate paragraphs. -rrp 11-02-16 C. SAFFLE G Removed figure 3, radiation exposure circuit. Update drawing to current
MIL-PRF-38535 requirements. -rrp 17-07-25 C. SAFFLE THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED.
REV
SHEET
REV
SHEET
REV STATUS REV G G G G G G G G G G G G G OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 PMIC N/A PREPARED BY
JOSEPH A. KERBY STANDARD
MICROCIRCUIT
DRAWING DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
http://www.landandmaritime.dla.mil CHECKED BY
D. A. DiCENZO
APPROVED BY THIS DRAWING IS AVAILABLE
FOR USE BY ALL
DEPARTMENTS
AND AGENCIES OF THE
DEPARTMENT OF DEFENSE AMSC N/A MICHAEL A. FRYE …