Datasheet Analog Devices HMC909LP4ETR — Ficha de datos

HMC909LP4E
v02.0511 RMS POWER DETECTOR
SINGLE-ENDED, DC -5.8 GHz Typical Applications Features
Broadband Single-Ended RF Input The HMC909LP4E is ideal for: ±1 dB Detection Accuracy to 5.8 GHz • Log –> Root-Mean-Square (RMS) Conversion Input Dynamic Range: -51 dBm to -11 dBm • Received Signal Strength Indication (RSSI) RF Signal Wave shape & Crest Factor Independent • Transmitter Signal Strength Indication (TSSI) Digitally Programmable Integration Bandwidth • RF Power Amplifier Efficiency Control +5V Operation from -40°C to +85°C • Receiver Automatic Gain Control Power Detectors -SMT 11 Excellent Temperature Stability • Transmitter Power Control Power-Down Mode
24 Lead 4x4mm SMT Package: 16mm² Functional Diagram General Description
The HMC909LP4E Power Detector is designed for
RF power measurement, and control applications for
frequencies up to 5.8 GHz. The detector provides
an accurate RMS representation of any broadband,
single-ended RF/IF input signal. The output is a temperature compensated monotonic, representation of
real signal power, measured with an input sensing
range of 40 dB.
The HMC909LP4E is ideally suited to those wide
bandwidth, wide dynamic range applications, requiring repeatable measurement of real signal power,
especially where RF/IF wave shape and/or crest factor
change with time.
The integration bandwidth of the HMC909LP4E is
digitally programmable with the use of input pins
SCI1-4 with a range of more than 4 decade. This
allows the user to dynamically set the operation
bandwidth providing the capability of handling different types of modulations on the same platform.
HMC909LP4E features an internal op-amp at output
stage, which provides for slope / intercept adjustments …

HMC909LP4E
v02.0511 RMS POWER DETECTOR
SINGLE-ENDED, DC -5.8 GHz Typical Applications Features
Broadband Single-Ended RF Input The HMC909LP4E is ideal for: ±1 dB Detection Accuracy to 5.8 GHz • Log -> Root-Mean-Square (RMS) Conversion Input Dynamic Range: -51 dBm to -11 dBm • Received Signal Strength Indication (RSSI) RF Signal Wave shape & Crest Factor Independent • Transmitter Signal Strength Indication (TSSI) Digitally Programmable Integration Bandwidth • RF Power Amplifier Efficiency Control +5V Operation from -40°C to +85°C • Receiver Automatic Gain Control Power Detectors -SMT 11 Excellent Temperature Stability • Transmitter Power Control Power-Down Mode
24 Lead 4x4mm SMT Package: 16mm² Functional Diagram General Description
The HMC909LP4E Power Detector is designed for
RF power measurement, and control applications for
frequencies up to 5.8 GHz. The detector provides
an accurate RMS representation of any broadband,
single-ended RF/IF input signal. The output is a temperature compensated monotonic, representation of
real signal power, measured with an input sensing
range of 40 dB.
The HMC909LP4E is ideally suited to those wide
bandwidth, wide dynamic range applications, requiring repeatable measurement of real signal power,
especially where RF/IF wave shape and/or crest factor
change with time.
The integration bandwidth of the HMC909LP4E is
digitally programmable with the use of input pins
SCI1-4 with a range of more than 4 decade. This
allows the user to dynamically set the operation
bandwidth providing the capability of handling different types of modulations on the same platform.
HMC909LP4E features an internal op-amp at output
stage, which provides for slope / intercept adjustments …