Datasheet MAX410ESA+ - Maxim OP AMP, R/R, PRECISION, 28 MHz, 8SOIC — Ficha de datos

Maxim MAX410ESA+

Part Number: MAX410ESA+

Descripción detallada

Manufacturer: Maxim

Description: OP AMP, R/R, PRECISION, 28 MHz, 8SOIC

data sheetDownload Data Sheet

Docket:
19-4194; Rev 4; 6/03
Single/Dual/Quad, 28MHz, Low-Noise, Low-Voltage, Precision Op Amps
General Description
The MAX410/MAX412/MAX414 single/dual/quad op amps set a new standard for noise performance in high-speed, low-voltage systems.

Input voltage-noise density is guaranteed to be less than 2.4nV/Hz at 1kHz. A unique design not only combines low noise with ±5V operation, but also consumes 2.5mA supply current per amplifier. Low-voltage operation is guaranteed with an output voltage swing of 7.3VP-P into 2k from ±5V supplies. The MAX410/MAX412/MAX414 also operate from supply voltages between ±2.4V and ±5V for greater supply flexibility. Unity-gain stability, 28MHz bandwidth, and 4.5V/µs slew rate ensure low-noise performance in a wide variety of wideband and measurement applications. The MAX410/MAX412/MAX414 are available in DIP and SO packages in the industry-standard single/dual/quad op amp pin configurations. The single comes in an ultrasmall TDFN package (3mm 3mm). o 2.5mA Supply

Simulation ModelSimulation Model

Specifications:

  • Amplifier Type: Rail - Rail
  • Bandwidth: 28 MHz
  • Base Number: 410
  • Gain Bandwidth: 28 MHz
  • Input Offset Voltage Max: 400 µV
  • Mounting Type: SMD
  • Number of Amplifiers: 1
  • Number of Pins: 8
  • Op Amp Type: Precision
  • Operating Temperature Range: -40°C to +85°C
  • Package / Case: SOIC
  • SVHC: No SVHC (18-Jun-2010)
  • Settling Time: 1.3 µs
  • Slew Rate: 4.5 V/µs
  • Supply Current Max: 2.7 mA
  • Supply Current: 2.5 mA
  • Supply Voltage Range: ± 2.4 V to ± 5.25 V

RoHS: Yes

Accessories:

  • Fischer Elektronik - ICK SMD A 8 SA
  • Roth Elektronik - RE932-01
  • STANNOL - 574601