Datasheet Microchip MCP37D10-200I/TE — Ficha de datos

MCP37210-200
MCP37D10-200
200 Msps, 12-Bit Low-Power Single-Channel ADC
Features Sample Rates: 200 Msps Signal-to-Noise Ratio (SNR) with fIN = 15 MHz
and -1 dBFS:
-67 dBFS (typical) at 200 Msps Spurious-Free Dynamic Range (SFDR) with
fIN = 15 MHz and -1 dBFS:
-96 dBc (typical) at 200 Msps Power Dissipation with LVDS Digital I/O:
-337 mW at 200 Msps Power Dissipation with CMOS Digital I/O:
-304 mW at 200 Msps, output clock = 100 MHz Power Dissipation Excluding Digital I/O:
-256 mW at 200 Msps Power-Saving Modes:
-89 mW during Standby
-24 mW during Shutdown Supply Voltage:
-Digital Section: 1.2V, 1.8V
-Analog Section: 1.2V, 1.8V Selectable Full-Scale Input Range: up to 1.8 VP-P Analog Input Bandwidth: 650 MHz Output Interface:
-Parallel CMOS, DDR LVDS Output Data Format:
-Two's complement or offset binary Optional Output Data Randomizer Digital Signal Post-Processing (DSPP) Options:
-Decimation filters for improved SNR
-Offset and Gain adjustment
-Noise-Shaping Requantizer (NSR)
-Digital Down-Conversion (DDC) with I/Q or
fS/8 output (MCP37D10-200) Built-In ADC Linearity Calibration Algorithms:
-Harmonic Distortion Correction (HDC) …