Datasheet Microchip MCP6294-E/SL — Ficha de datos

MCP621/1S/2/3/4/5/9
20 MHz, 200 µV Op Amps with mCal
Features: Description: •
•
•
•
•
• The Microchip Technology Inc. MCP621/1S/2/3/4/5/9
family of high bandwidth and high slew rate operational
amplifiers features low offset. At power-up, these op
amps are self-calibrated using mCal. Some package
options also provide a Calibration/Chip Select pin
(CAL/CS) that supports a Low-Power mode of
operation, with offset calibration at the time normal
operation is re-started. These amplifiers are optimized
for high speed, low noise and distortion, single-supply
operation with rail-to-rail output and an input that
includes the negative rail. •
•
•
•
•
• Gain-Bandwidth Product: 20 MHz (typical) …

MCP6291/1R/2/3/4/5
1.0 mA, 10 MHz Rail-to-Rail Op Amp
Features Description •
•
•
•
•
•
•
• The Microchip Technology Inc. MCP6291/1R/2/3/4/5
family of operational amplifiers (op amps) provide wide
bandwidth for the current. This family has a 10 MHz
Gain Bandwidth Product (GBWP) and a 65° phase
margin. This family also operates from a single supply
voltage as low as 2.4V, while drawing 1 mA (typical)
quiescent current. In addition, the MCP6291/1R/2/3/4/5
supports rail-to-rail input and output swing, with a
common mode input voltage range of VDD + 300 mV to
VSS – 300 mV. This family of operational amplifiers is
designed with Microchip’s advanced CMOS process. Gain Bandwidth Product: 10 MHz (typical)
Supply Current: IQ = 1.0 mA
Supply Voltage: 2.4V to 6.0V
Rail-to-Rail Input/Output …