DATASHEET
ISL28136 FN6153
Rev 6.00
January 16, 2014 5MHz, Single Precision Rail-to-Rail Input-Output (RRIO) Op Amp
The ISL28136 is a low-power single operational amplifier
optimized for single supply operation from 2.4V to 5.5V,
allowing operation from one lithium cell or two Ni-Cd batteries.
This device features a gain-bandwidth product of 5MHz and is
unity-gain stable with a -3dB bandwidth of 13MHz.
This device features an Input Range Enhancement Circuit
(IREC), which enables it to maintain CMRR performance for
input voltages greater than the positive supply. The input
signal is capable of swinging 0.25V above the positive
supply and to the negative supply with only a slight
degradation of the CMRR performance. The output
operation is rail-to-rail. Features 5MHz Gain bandwidth product @ AV = 100 13MHz -3dB unity gain bandwidth 900ВµA typical supply current 150ВµV maximum offset voltage (8 Ld SOIC) 5nA typical input bias current Down to 2.4V single supply voltage range Rail-to-rail input and output Enable pin The part typically draws less than 1mA supply current while
meeting excellent DC accuracy, AC performance, noise and
output drive specifications. Operation is guaranteed over
-40В°C to +125В°C temperature range. -40В°C to +125В°C operation Ordering Information Low-end audio Pb-free (RoHS compliant) Applications 4mA to 20mA current loops PART
NUMBER
(Notes 2, 3) PART
MARKING PACKAGE
(Pb-Free) PKG. …
