Datasheet Intersil EL5166IS-T13 — Ficha de datos

DATASHEET
EL5166, EL5167 FN7365
Rev 6.00
September 14, 2010 1.4GHz Current Feedback Amplifiers with Enable
The EL5166 and EL5167 amplifiers are of the current
feedback variety and exhibit a very high bandwidth of
1.4GHz at AV = +1 and 800MHz at AV = +2. This makes
these amplifiers ideal for today's high speed video and
monitor applications, as well as a number of RF and IF
frequency designs. Features With a supply current of just 8.5mA and the ability to run
from a single supply voltage from 5V to 12V, these amplifiers
offer very high performance for little power consumption. Low noise = 1.7nV/пѓ–Hz The EL5166 also incorporates an enable and disable
function to reduce the supply current to 13ВµA typical per
amplifier. Allowing the CE pin to float or applying a low logic
level will enable the amplifier. Fast enable/disable (EL5166 only) The EL5167 is offered in the 5 Ld SOT-23 package and the
EL5166 is available in the 6 Ld SOT-23 as well as the
industry-standard 8 Ld SOIC packages. Both operate over
the industrial temperature range of -40В°C to +85В°C. NC 1 VS-4 Single and dual supply operation from 5V to 12V 8.5mA supply current 600MHz family -(EL5164 and EL5165) 400MHz family -(EL5162 and EL5163) 200MHz family -(EL5160 and EL5161) Pb-free available (RoHS compliant) Applications + Cable drivers EL5166
(6 LD SOT-23)
TOP VIEW EL5166
(8 LD SOIC)
TOP VIEW IN+ 3 6000V/Вµs slew rate Video amplifiers Pinouts IN-2 Gain-of-1 bandwidth = 1.4GHz/gain-of-2
bandwidth = 800MHz 8 CE OUT 1 7 VS+ VS-2 6 OUT IN+ 3 RGB amplifiers …