Datasheet Analog Devices ADIS16203CCCZ — Ficha de datos

Programmable 360° Inclinometer
ADIS16203
FEATURES angle data in a convenient format that can be accessed using a
serial peripheral interface (SPI). The SPI interface provides access
to multiple measurements: 360° linear inclination angles, ±180°
linear incline angles, temperature, power supply, and one auxiliary
analog input. Easy access to calibrated digital sensor data provides
developers with a system-ready device, reducing development
time, cost, and program risk. 0° to 360° Inclinometer
±180 output format option
14-bit digital inclination outputs
Linear output, 0.025° resolution
12-bit digital temperature sensor output
Digitally controlled bias calibration
Digitally controlled sample rate
Digitally controlled filtering
Digitally controlled direction/orientation
Dual alarm settings with rate/threshold limits
Auxiliary digital I/O
Digitally activated self-test
Digitally activated low power mode
SPI®-compatible serial interface
Auxiliary 12-bit ADC input and DAC output …

Programmable 360° Inclinometer
ADIS16203 Silicon Anomaly
ADIS16203 ANOMALIES This anomaly list describes the known bugs, anomalies, and workarounds for the ADIS16203.
Analog Devices, Inc., is committed, through future silicon revisions, to continuously improve silicon functionality. Analog Devices tries
to ensure that these future silicon revisions remain compatible with your present software/systems by implementing the recommended
workarounds outlined here. ANOMALY STATUS
Reference Number
er001
er002
er003 Description
Manual Flash®/EE memory update failures
ALM_SMPL1/ALM_SMPL2 write causes device failure
Invalid orientation bit not active Status
Fixed
Fixed
No fix MANUAL FLASH/EE MEMORY UPDATE FAILURES [er001]
Background Issue
Workaround Related Issues The ADIS16203 uses a dual memory structure to maintain its operational configuration. The RAM register structure
controls the operation of the device, and the Flash/EE memory contents determine what is loaded into the RAM at
startup and during reset recovery events. The Flash/EE memory is updated by using a control bit in the COMMAND register
of this part.
Flash/EE memory update fails at a rate of approximately 5%.
Date Code 0722 and older can exhibit this behavior. …