Datasheet Microchip MIC2776H-YM5-TR — Ficha de datos

MIC2776 Micrel, Inc. MIC2776
Micro-Power Low Voltage Supervisor General Description Features The MIC2776 is a power supply supervisor which provides
under-voltage monitoring and power-on reset generation in a
compact 5-pin SOT package. Features include an adjustable
under-voltage detector, a delay-generator, a manual reset
input, and a choice of active-high, active-low, or open-drain
active-low reset output. The user-adjustable monitoring input
is compared against a 300mV reference. This low reference
voltage allows monitoring voltages lower than those supported
by previous supervisor ICs.
The reset output is asserted for no less than 140ms at poweron and any time the input voltage drops below the reference
voltage. It remains asserted for the timeout period after the
input voltage subsequently rises back above the threshold
boundary. A reset can be generated at any time by asserting
the manual reset input, /MR. The reset output will remain active at least 140ms after the release of /MR. The /MR input
can also be used to daisy-chain the MIC2776 onto existing
power monitoring circuitry or other supervisors. Hysteresis
is included to prevent chattering due to noise. Typical supply
current is a low 3.0ВµA. User-adjustable input can monitor supplies as low as
0.3V В±1.5% threshold accuracy Separate VDD input Generates power-on reset pulse (140ms min.) Manual reset input Choice of active-high, active-low or open-drain activelow reset output Inputs can be pulled above VDD (7V abs. max.) Open-drain output can be pulled above VDD (7V abs.
max.) Ultra-low supply current, 3.0ВµA typical Rejects brief input transients IttyBittyв„ў SOT-23-5 package Typical Application Applications VCORE 1.0V
VI/O 2.5V Power_Good R1 MIC2776L
VDD /RST …