DATASHEET
HS-26CT31RH, HS-26CT31EH FN2929
Rev 5.00
May 23, 2013 Radiation Hardened Quad Differential Line Drivers Features The Intersil HS-26CT31RH, HS-26CT31EH are quad differential
line drivers designed for digital data transmission over
balanced lines and meet the requirements of EIA standard
RS-422. Radiation hardened CMOS processing assures low
power consumption, high speed, and reliable operation in the
most severe radiation environments. Electronically Screened to SMD #5962-95632 QML Qualified Per MIL-PRF-38535 Requirements 1.2 Micron Radiation Hardened CMOS Total Dose Up to 300kRAD(Si) The HS-26CT31RH, HS-26CT31EH accept TTL signal levels and
convert them to RS-422 compatible outputs. These circuits use
special outputs that enable the drivers to power down without
loading down the bus. Enable and disable pins allow several
devices to be connected to the same data source and
addressed independently. Latchup Free EIA RS-422 Compatible Outputs (Except for IOS) Operation with TTL Based on VIH = VDD/2 High Impedance Outputs when Disabled or Powered Down Low Power Dissipation 2.75mW Standby (Max) Specifications Single 5V Supply Specifications for Rad Hard QML devices are controlled by the
Defense Logistics Agency Land and Maritime (DLA). The SMD
numbers listed here must be used when ordering. Low Output Impedance 10пЃ— or Less Detailed Electrical Specifications for these devices are
contained in SMD 5962-95632. Applications Full -55В°C to +125В°C Military Temperature Range Line Transmitter for MIL-STD-1553 Serial Data Bus Line Transmitter for RS422 Ordering Information
ORDERING
NUMBER (Note 1) INTERNAL
MKT. NUMBER PART MARKING TEMP. RANGE
(В°C) PACKAGE PKG.
DWG. # 5962F9563201QEC HS1-26CT31RH-8 Q 5962F95 63201QEC -55 to +125 16 LD SBDIP D16.3 5962F9563201QXC HS9-26CT31RH-8 Q 5962F95 63201QXC -55 to +125 16 LD Flatpack K16.A 5962F9563201VEC HS1-26CT31RH-Q Q 5962F95 63201VEC -55 to +125 16 LD SBDIP D16.3 5962F9563201VXC HS9-26CT31RH-Q Q 5962F95 63201VXC -55 to +125 16 LD Flatpack K16.A HS1-26CT31RH/PROTO HS1-26CT31RH/PROTO HS1 -26CT31RH /PROTO -55 to +125 16 LD SBDIP D16.3 HS9-26CT31RH/PROTO HS9-26CT31RH/PROTO HS9 -26CT31RH /PROTO -55 to +125 16 LD Flatpack K16.A 5962F9563201V9A HS0-26CT31RH-Q -55 to +125 Die 5962F9563202VXC HS9-26CT31EH-Q -55 to +125 16 LD Flatpack HS0-26CLV31RH/SAMPLE HS0-26CLV31RH/SAMPLE -55 to +125 Die 5962F9563201VYC HS9G-26CT31RH-Q (Note 2) -55 to +125 16 LD Flatpack K16.A HS9G-26CT31RH/PROTO HS9G-26CT31RH/PROTO (Note 2) HS9G-26CT31RH/PROTO -55 to +125 16 LD Flatpack K16.A Q 5962F95 63202VXC Q 5962F95 63201VYC K16.A NOTES:
1. These …
