Datasheet Microchip USB2507-ADT — Ficha de datos

USB2507
Integrated USB 2.0 Compatible 7-Port Hub
Highlights Integrated USB 2.0 Compatible 7-Port Hub
-7 Transaction Translators for highest performance
-High-Speed (480Mbits/s), Full-Speed
(12Mbits/s) and Low-Speed (1.5Mbits/s)
compatible
-Full power management with per port or
ganged, selectable power control
-Detects Bus-Power/Self-Power source and
changes mode automatically Complete USB Specification 2.0 Compatibility
-Includes USB 2.0 Transceivers VID/PID/DID, and Port Configuration for Hub via:
-Single Serial I2C EEPROM
-SMBus Slave Port Default VID/PID/DID, allows functionality when
configuration EEPROM is absent Hardware Strapping options allow for configuration without an external EEPROM or SMBus Host On-Board 24MHz Crystal Driver Circuit or 24 MHz
external clock driver Internal PLL for 480MHz USB 2.0 Sampling Internal 1.8V Linear Voltage Regulator Integrated USB termination and Pull-up/Pull-down
resistors Internal Short Circuit protection of USB differential
signal pins 1.8 Volt Low Power Core Operation 3.3 Volt I/O with 5V Input Tolerance 80-Pin TQFP RoHS compliant package пѓЈ 2007 -2016 Microchip Technology Inc. DS000002251A-page 1 USB2507 TO OUR VALUED CUSTOMERS
It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip
products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and
enhanced as new volumes and updates are introduced.
If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via
E-mail at docerrors@microchip.com. We welcome your feedback. Most Current Data Sheet …