Datasheet Texas Instruments TPS23754PWP — Ficha de datos

FabricanteTexas Instruments
SerieTPS23754
Numero de parteTPS23754PWP
Datasheet Texas Instruments TPS23754PWP

Interfaz PoE de alta potencia / alta eficiencia y controlador CC / CC 20-HTSSOP -40 a 125

Hojas de datos

TPS2375x High-Power/High-Efficiency PoE Interface and DC-DC Controller datasheet
PDF, 2.1 Mb, Revisión: H, Archivo publicado: agosto 12, 2015
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante

Embalaje

Pin20
Package TypePWP
Industry STD TermHTSSOP
JEDEC CodeR-PDSO-G
Package QTY70
CarrierTUBE
Device MarkingTPS23754
Width (mm)4.4
Length (mm)6.5
Thickness (mm)1
Pitch (mm).65
Max Height (mm)1.2
Mechanical DataDescargar

Paramétricos

DC/DC ControlPD and DC/DC
Fault ResponseAuto Retry
PD Power Level25W
Package GroupHTSSOP
Package Size: mm2:W x L20HTSSOP: 42 mm2: 6.4 x 6.5(HTSSOP) PKG
PoE Current Limit(Min)850 mA
PoE Inrush Limit(Typ)140 mA
PoE Standards Supported802.3at Type 1 (802.3af),802.3at Type 2
Special FeaturesThermal Shutdown,Second Gate Drive
Switching FrequencyProgrammable,Synchronizable
Vin(Max)57 V
Vin(Min)15.7 V
rDS(on) per FET(Typ)430 mOhms

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: TPS23754EVM-420
    20-57V Vin, 5V Vout High Power Evaluation Module for TPS23754
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  • Evaluation Modules & Boards: TPS23754EVM-383
    33-57V Vin, 12V Vout High Power Evaluation Module for TPS23754
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • Using the TPS23753A with an External Error Amplifier
    PDF, 755 Kb, Archivo publicado: agosto 6, 2010
  • PoE Powered Device for 24 VAC Building Power Applications
    PDF, 2.6 Mb, Archivo publicado: sept 10, 2008
  • Implementing a Buck Converter With the TPS23753A
    PDF, 454 Kb, Archivo publicado: sept 20, 2010
    The TPS23753A is intended for isolated applications and does not incorporate an internal voltage-regulation error amplifier. Due to its integration and features it may be advantageous to use the TPS23753A in non-isolated applications. This application report shows additional circuits necessary to implement a low-side switch buck converter using the TPS23753A.
  • Practical Guidelines EMI Compliant PoE
    PDF, 5.2 Mb, Archivo publicado: marzo 27, 2008
    Practical Guidelines to Designing an EMI Compliant PoE Powered Device with Non-Isolated DC/DC
  • Designing an EMI Compliant PoE with Isolated Flyback
    PDF, 4.6 Mb, Archivo publicado: mayo 20, 2008
  • Efficiency-Optimized, Synchronous Flyback, High-Power PoE Controller/Converter
    PDF, 649 Kb, Archivo publicado: enero 17, 2012
    TPS23754 Efficiency Optimized, Synchronous Flyback, High Power POE Reference Design
  • Bridging the Efficiency Gap in PoE Powered Device Designs
    PDF, 113 Kb, Archivo publicado: marzo 18, 2011
    The trend toward higher efficiency is becoming increasingly evident for Power over Ethernet (PoE) applications. Powered Device (PD) suppliers are looking for solutions that enable them to market their products as being “Green” or energy efficient. All of the components within the PD’s power path need to be closely examined to see if any significant improvements in efficiency can be made. This appl
  • High Efficiency Class 4 PoE Powered Device
    PDF, 342 Kb, Archivo publicado: marzo 23, 2011
    This report introduces a high-efficiency, Power-over-Ethernet (PoE) Powered Device (PD) that complies with the Type 2, Class 4 power requirements outlined in the IEEE802.3at Draft 3.3 standard. The standard permits a Type 2, Class 4 PD to draw up to 25.5 W of power at the Power Interface (PI) when connected to compatible Type 2 Power Sourcing Equipment (PSE) using Type 2 compliant cabling. A fully
  • Advanced Adapter ORing Solutions using the TPS23753 (Rev. A)
    PDF, 203 Kb, Revisión: A, Archivo publicado: feb 9, 2009
    The TPS23753 has a number of features that simplify ORing of Power over Ethernet (PoE) and ac-powered adapters. These features are integrated into the powered device (PD) and dc/dc controller to provide an integrated solution set. This application note explores these features and provides other critical information.
  • Lightning Surge Considerations for PoE Powered Devices
    PDF, 197 Kb, Archivo publicado: abr 30, 2015

Linea modelo

Serie: TPS23754 (5)

Clasificación del fabricante

  • Semiconductors > Power Management > Power Over Ethernet (PoE)/LAN Solutions > Powered Device