Datasheet Texas Instruments TRF7960ARHBR — Ficha de datos

Fabricante	Texas Instruments
Serie	TRF7960A
Numero de parte	TRF7960ARHBR

Hojas de datos

Precios

Estado

Embalaje

Paramétricos

Plan ecológico

Kits de diseño y Módulos de evaluación

• Evaluation Modules & Boards: TRF7960ATB
  TRF7960A Target Board
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar

Notas de aplicación

• Descargar
  TRF7960A Firmware Design Hints
  PDF, 115 Kb, Archivo publicado: mayo 27, 2011
  This application report is a reference for the firmware developer using the TRF7960A in conjunction with microcontroller (for example, an MSP430 or ARM device). This document supersedes TRF796x Software Design Hints (SLOA153).
• Descargar
  TRF7960A Reference Firmware Description
  PDF, 303 Kb, Archivo publicado: mayo 27, 2011
  This application report describes the firmware implemented in the MSP430F2370 for use with the Texas Instruments TRF7960A evaluation module (EVM). The TRF7960AEVM is a multiple-standard fully integrated 13.56-MHz radio frequency identification (RFID) analog front end and data framing reader system. This reference firmware was developed using the Code Composer Studioв„ў IDE v4.2.1.00004 and can be al
• Descargar
  Antenna Design Guide for the TRF79xx
  PDF, 1.1 Mb, Archivo publicado: mayo 30, 2017
  This paper describes the design steps for creating and tuning an NFC/high frequency (HF) RFID antenna tuned to 13.56 MHz for the TRF79xxA series of devices. The matching network uses a 50-О© 3-element match. A 3-element match is recommended as it allows the designer to select the required antenna quality factor (Q) for the application.
• Descargar
  Management of the TRF7960 and TRF7960A Startup Sequence
  PDF, 138 Kb, Archivo publicado: jun 5, 2012
  System developers concerned about minimizing the current draw of TRF7960, -60A (and their variants) systems at startup time need guidance about handling the Regulator Control register (0x0B) value. Guidance is necessary due to the conditions under which the TRF796x/-6xA starts up with the automatic (default) setting of this register, after the EN line (pin 28) is asserted from the controlling MCU
• Descargar
  Comparison of TRF7960 and TRF7960A
  PDF, 54 Kb, Archivo publicado: mayo 27, 2011
  This application report helps current and new users of the TRF7960 high-frequency RFID/NFC reader understand the differences between the TRF7960 and the TRF7960A devices. Understanding these differences in detail and applying this knowledge to application-specific requirements helps designers make informed decisions about whether or not a bill of materials change is needed.
• Descargar
  Implementation of ISO14443A Anti-Collision Sequence in the TI TRF796x
  PDF, 165 Kb, Archivo publicado: abr 24, 2009
• Descargar
  TRF7960A RFID Multiplexer Example System
  PDF, 942 Kb, Archivo publicado: mayo 22, 2012
  The purpose of this application report is to describe in concise detail the 16-channel high-frequency (HF) (13.56 MHz) RFID Reader System (based on the TRF7960A RFID IC) designed by Texas Instruments for customer use. The system hardware is comprised of one (1) RFID controller board and four (4) antenna boards, along with their associated cables (power, RF, GPIO, and host communication). The syste
• Descargar
  Implementation of ISO14443B Protocol in the TI TRF796x
  PDF, 143 Kb, Archivo publicado: abr 28, 2009
• Descargar
  Implementation of ISO15693 Protocol in the TI TRF796x
  PDF, 198 Kb, Archivo publicado: abr 28, 2009
• Descargar
  Using the SPI Interface with TRF7960 (Rev. A)
  PDF, 394 Kb, Revisión: A, Archivo publicado: mayo 30, 2017
  One of the microcontroller interfacing options available for the TRF7960 is the SPI with SS*. This is also known as 4-wire hardware SPI mode. The TRF7960 device acts as the slave device and the microcontroller or DSP is the master in this configuration.
• Descargar
  TRF79xxA HF-RFID Reader Layout Design Guide (Rev. A)
  PDF, 799 Kb, Revisión: A, Archivo publicado: abr 18, 2016
  This application note describes suggested guidelines for use in the laying out the TRF79xxA family of HF RFID readers. As each customer’s implementation will be different, it is the customer's responsibility to ensure that all the proper methodologies and techniques are followed to ensure optimal performance.
• Descargar
  Antenna Matching for the TRF7960 RFID Reader (Rev. A)
  PDF, 1.2 Mb, Revisión: A, Archivo publicado: sept 24, 2013
• Descargar
  NFC/RFID Reader Ultra-Low-Power Card Presence Detect With MSP430 and TRF79xxA
  PDF, 2.8 Mb, Archivo publicado: marzo 18, 2013
  NFC and RFID reader battery-powered applications must have a defined and limited energy consumption budget as well as low cost for a product to be realized. Techniques and strategies have emerged over the years for the card presence detection that attempt to address both concerns.The intent of this application report is to contribute to these techniques and strategies by offering an advancement

Linea modelo

Clasificación del fabricante

• Semiconductors > Wireless Connectivity > NFC / RFID