Datasheet Texas Instruments ACF2101BU — Ficha de datos

FabricanteTexas Instruments
SerieACF2101
Numero de parteACF2101BU
Datasheet Texas Instruments ACF2101BU

Bajo ruido, integrador de doble conmutación 24-SOIC -40 a 125

Hojas de datos

Low Noise, Dual Switched Integrator datasheet
PDF, 249 Kb, Archivo publicado: sept 27, 2000
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin24
Package TypeDW
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY25
CarrierTUBE
Device MarkingACF2101BU
Width (mm)7.5
Length (mm)15.4
Thickness (mm)2.35
Pitch (mm)1.27
Max Height (mm)2.65
Mechanical DataDescargar

Paramétricos

Additional FeaturesN/A
ArchitectureN/A
GBW(Typ)2 MHz
Input Bias Current(Max)1 pA
Iq per channel(Max)15.5 mA
Iq per channel(Typ)15.5 mA
Number of Channels2
Offset Drift(Typ)5 uV/C
Operating Temperature Range-40 to 125 C
Output Current(Typ)25 mA
Package GroupSOIC
Package Size: mm2:W x L24SOIC: 160 mm2: 10.3 x 15.5(SOIC) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)3 V/us
Total Supply Voltage(Max)36 +5V=5, +/-5V=10
Total Supply Voltage(Min)14.5 +5V=5, +/-5V=10
Vos (Offset Voltage @ 25C)(Max)2 mV

Plan ecológico

RoHSObediente

Notas de aplicación

  • Improved Noise Performance of the ACF2101 Switched Integrator
    PDF, 42 Kb, Archivo publicado: sept 27, 2000
    The signal-to-noise ratio and bandwidth of the combination of the ACF2101 dual, switched integrator and a low-level input current is exceptional when compared to the performance of a classical transimpedance amplifier. To further improve the ACF2101 signal-to-noise ratio, a resistor can be added in series with the input sensor.
  • The ACF2101 Used as a Bipolar Switched Integrator
    PDF, 35 Kb, Archivo publicado: sept 27, 2000
    The ACF2101 is a dual, switched integrator that is typically used to convert a positive input current to a negative output voltage by integration, using an integration capacitor (CINT), either on the chip or an external capacitor provided by the user. Typical applications for the ACF2101 are photo diode integrators, current measurements, charge measurements, and a CT scanner front end.
  • Comparison of Noise Performance of FET Transimpedence Amp/Switched Integrator
    PDF, 66 Kb, Archivo publicado: sept 27, 2000
    Low-input current FET operational amplifiers are universlly used to monitor photodetector, or more commonly photodiode currents. These photodetectors bridge the gap between a physical event, light, and electronics. There are a variey of amplifier configurations to select from and the choice is based on noise, bandwidth, offset, and linearity. A considerable amount has been written on the performan

Linea modelo

Serie: ACF2101 (3)

Clasificación del fabricante

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps