Datasheet Texas Instruments XCC1312R1F3RGZR — Ficha de datos

FabricanteTexas Instruments
SerieCC1312R
Numero de parteXCC1312R1F3RGZR
Datasheet Texas Instruments XCC1312R1F3RGZR

SimpeLink Sub-1 GHz CC1312R MCU inalámbrico 48-VQFN -40 a 85

Hojas de datos

CC1312R SimpleLink High-Performance Sub-1 GHz Wireless MCU datasheet
PDF, 547 Kb, Archivo publicado: enero 16, 2018
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante

Embalaje

Pin48
Package TypeRGZ
Industry STD TermVQFN
JEDEC CodeS-PQFP-N
Package QTY2500
CarrierLARGE T&R
Width (mm)7
Length (mm)7
Thickness (mm)0.9
Pitch (mm)0.5
Max Height (mm)1
Mechanical DataDescargar

Paramétricos

Data Rate(Max)4000 kbps
Device TypeSimpleLink Wireless MCU
Flash352 KB
Frequency BandsSub-1 GHz MHz
GPIO30
RX Current (Lowest)5.7 mA
RatingCatalog
Security EnablerCryptographic acceleration,Debug security,Device identity,Software IP protection
Sensitivity (Best)-125 dBm
TX Power(Max)14 dBm
TechnologySub-1 GHz
Throughput(Max)4.0 Mbps

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Debug Probes/Analyzers: TMDSEMU200-U
    XDS200 USB Debug Probe
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  • Development Kits: LAUNCHXL-CC1312R1
    SimpleLink Sub-1 GHz CC1312R Wireless Microcontroller (MCU) LaunchPad Development Kit
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • Low-Power ADC Solution for CC13x2 and CC26x2
    PDF, 190 Kb, Archivo publicado: marzo 2, 2018
    The 12-bit analog-to-digital converter (ADC) peripheral block included in CC13x2 and CC26x2 deviceswhich is typically used by the Sensor Controller requires the SCLK_HF signal and is therefore notavailable in low-power (2 MHz) mode. The goal of this application note is to help users create an 8-bitsuccessive-approximation (SAR)-type low-power ADC using the CC13x2 and CC26x2 Sensor Con
  • Single-Chip Flow Metering Solution With the CC13x2R Wireless MCUs
    PDF, 88 Kb, Archivo publicado: feb 27, 2018
  • Sensor Sequencing Using the CC13x2 and CC26x2 Sensor Controller
    PDF, 252 Kb, Archivo publicado: marzo 5, 2017
    The purpose of this application note is to demonstrate how current consumption can be minimized bymaking the Sensor Controller automatically enable a sensor at a designated time period before the sensoris to be sampled. This implementation allows the Sensor Controller to stay in the lowest-possible powermode while the sensor boots and then start up when the sensor is ready. In this appl
  • Hardware Migration From CC1310 to CC1312R
    PDF, 27 Kb, Archivo publicado: oct 17, 2017
    This application report describes the required hardware changes when moving from the CC1310 to the CC1312R SimpleLin™ wireless MCU.
  • Ultra-Low Power Designs With the CC13x2 and CC26x2 Sensor Controller
    PDF, 87 Kb, Archivo publicado: feb 27, 2018
  • Getting Started With the CC13xx and CC26xx Sensor Controller
    PDF, 1.1 Mb, Archivo publicado: oct 6, 2017
    This application note is intended as an introduction to the low-power Sensor Controller Engine found in theCC13xx and CC26xx devices. It explains the benefits of using the Sensor Controller in various use cases.The application note also describes how to get started using the Sensor Controller and directs you to therequired tools and collaterals.

Linea modelo

Serie: CC1312R (3)

Clasificación del fabricante

  • Semiconductors > Wireless Connectivity > SimpleLink Solutions > Sub-1 GHz