Datasheet Analog Devices HMC365 — Ficha de datos

HMC365
v05.0109 FREQUENCY DIVIDERS -CHIP 1 GaAs HBT MMIC
DIVIDE-BY-4, DC -13 GHz Typical Applications Features Prescaler for DC to Ku Band PLL Applications: Ultra Low SSB Phase Noise: -151 dBc/Hz • Satellite Communication Systems Wide Bandwidth • Fiber Optic Output Power: 5 dBm • Piont-to-Point and Point-to-Multi-Point Radios Single DC Supply: +5V • VSAT Small Size: 1.30 x 0.69 x 0.1 mm Functional Diagram General Description
The HMC365 is a low noise Divide-by-4 Static Divider
with InGaP GaAs HBT technology that has a small
size of 1.30 x 0.69 mm. This device operates from
DC (with a square wave input) to 13 GHz input
frequency with a single +5V DC supply. The low
additive SSB phase noise of -151 dBc/Hz at 100 kHz
offset helps the user maintain good system noise
performance. Electrical Specifi cations, TA = +25° C, 50 Ohm System, Vcc = 5V
Parameter Conditions Min. Typ. 13 14
0.2 0.5 GHz Fin = 1 to 10 GHz -15 >-20 +10 dBm Fin = 10 to 12 GHz -10 >-15 +3 dBm +3 Maximum Input Frequency
Minimum Input Frequency
Input Power Range Sine Wave Input. [1] Max. Units
GHz Fin = 12 to 13 GHz -5 >-8 Output Power [2] Fin = 13 GHz 2 5 Reverse Leakage Both RF Outputs Terminated 45 dB Pin = 0 dBm, Fin = 6 GHz -151 dBc/Hz Pin = 0 dBm, Fout = 882 MHz 100 ps 110 mA SSB Phase Noise (100 kHz offset)
Output Transition Time
Supply Current (Icc) [2] dBm
dBm [1] Divider will operate down to DC for square-wave input signal.
[2] When operated in high power mode (pin 8 connected to ground). 1 -26 For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc., …