Datasheet Analog Devices HMC361-Die — Ficha de datos

HMC361
v07.0109 FREQUENCY DIVIDERS -CHIP 1 GaAs HBT MMIC
DIVIDE-BY-2, DC -11 GHz Typical Applications Features Prescaler for DC to X Band PLL Applications: Ultra Low SSB Phase Noise: -148 dBc/Hz • Satellite Communication Systems Wide Bandwidth • Fiber Optic Output Power: 3 dBm • Point-to-Point and Point-to-Multi-Point Radios Single DC Supply: +5V • VSAT Small Size: 1.14 x 0.69 x 0.1 mm Functional Diagram General Description
The HMC361 is a low noise Divide-by-2 Static Divider
with InGaP GaAs HBT technology that has a small
size of 1.14 x 0.69 mm. This device operates from
DC (with a square wave input) to 11 GHz input frequency with a single +5V DC supply. The low additive SSB phase noise of -148 dBc/Hz at 100 kHz
offset helps the user maintain good system noise
performance. Electrical Specifi cations, TA = +25° C, 50 Ohm System, Vcc = 5V
Parameter Conditions Min. Typ. 11 12
0.2 0.5 GHz Fin = 1 to 9 GHz -15 >-20 +10 dBm Fin = 9 to 11 GHz -10 >-15 +2 dBm Fin = 6 GHz 0 3 Fin = 9 GHz -5 Fin = 11 GHz -8 Maximum Input Frequency
Minimum Input Frequency
Input Power Range Output Power [2] Reverse Leakage
SSB Phase Noise (100 kHz offset)
Output Transition Time Sine Wave Input. [1] Max. Units
GHz dBm
dBm
dBm Both RF Outputs Terminated 45 dB Pin = 0 dBm, Fin = 6 GHz -148 dBc/Hz Pin = 0 dBm, Fout = 882 MHz 100 ps 83 mA Supply Current (Icc) [2]
[1] Divider will operate down to DC for square-wave input signal.
[2] When operated in high power mode (pin 8 connected to ground). 1-2 For price,
delivery,
and to placeCorporation:
orders: Analog Devices, Inc., …