Datasheet Analog Devices LTM8063IY#PBF — Ficha de datos

LTM8063
40VIN, 2A Silent Switcher
µModule Regulator
FEATURES DESCRIPTION Low Noise Silent Switcher® Architecture
nn Wide Input Voltage Range: 3.2V to 40V
nn Wide Output Voltage Range: 0.8V to 15V
nn 2A Continuous Output Current at 12V , 5V
IN
OUT,
TA = 85°C
nn 2.5A Peak Current
nn Selectable Switching Frequency: 200kHz to 2.2MHz
nn External Synchronization
nn Configurable as an Inverter
nn 6.25mm × 4mm × 2.22mm BGA Package The LTM®8063 is a 40VIN, 2A continuous, 2.5A peak, stepdown µModule® (power module) regulator. Included in
the package are the switching controller, power switches,
inductor, and all support components. Operating over an
input voltage range of 3.2V to 40V, the LTM8063 supports
an output voltage range of 0.8V to 15V and a switching
frequency range of 200kHz to 2.2MHz, each set by a single
resistor. Only the input and output filter capacitors are
needed to finish the design. nn The low profile package enables utilization of unused
space on the bottom of PC boards for high density point of …

LTM8063
40VIN, 2A Silent Switcher
µModule Regulator
FEATURES DESCRIPTION Low Noise Silent Switcher® Architecture
nn Wide Input Voltage Range: 3.2V to 40V
nn Wide Output Voltage Range: 0.8V to 15V
nn 2A Continuous Output Current at 12V , 5V
IN
OUT,
TA = 85°C
nn 2.5A Peak Current
nn Selectable Switching Frequency: 200kHz to 2.2MHz
nn External Synchronization
nn Configurable as an Inverter
nn 6.25mm × 4mm × 2.22mm BGA Package The LTM®8063 is a 40VIN, 2A continuous, 2.5A peak, stepdown µModule® (power module) regulator. Included in
the package are the switching controller, power switches,
inductor, and all support components. Operating over an
input voltage range of 3.2V to 40V, the LTM8063 supports
an output voltage range of 0.8V to 15V and a switching
frequency range of 200kHz to 2.2MHz, each set by a single
resistor. Only the input and output filter capacitors are
needed to finish the design. nn The low profile package enables utilization of unused space
on the bottom of PC boards for high density point of load …