Datasheet Analog Devices LTM4647EY#PBF — Ficha de datos

LTM4647
30A DC/DC Step-Down
µModule Regulator
FEATURES DESCRIPTION 4.7V to 15V Input Voltage Range
n 0.6V to 1.8V Output Voltage Range
n 30A DC Output Current
n ±1.2% Total DC Output Voltage Error (–40°C to 125°C)
n High Reliability N + 1 Phase Redundancy Supported
n Internal or External Control Loop Compensatio Differential Remote Sense Amplifier for Precision
Regulatio Current Mode Control/Fast Transient Response
n Multiphase Current Sharing Up to 180A
n Built-In Temperature Monitoring
n Selectable Pulse-Skipping, Burst Mode® Operatio Soft-Start/Voltage Tracking
n Frequency Synchronizatio Output Overvoltage Protectio Output Overcurrent Foldback Protectio 9mm × 15mm × 5.01mm BGA Package The LTM®4647 is a complete 30A output switching mode
step-down DC/DC µModule® (power module) regulator.
Included in the package are the switching controller, power
FETs, inductor and all supporting components. Operating
over an input voltage range of 4.7V to 15V, the LTM4647
supports an output voltage range of 0.6V to 1.8V, set by
a single external resistor. Only a few input and output
capacitors are needed. n APPLICATIONS Telecom, Networking and Industrial Equipment Point-of-Load Regulation Its high efficiency design delivers 87% efficiency from 12V
input to 1.0V output with 30A continuous load current.
High switching frequency and a current mode architecture …