7UL1T02FU
CMOS Digital Integrated Circuits Silicon Monolithic 7UL1T02FU
1. Functional Description
• 2-Input NOR Gate with Level Shifting 2. Features
(1) Wide operating voltage range: VCC = 2.3 to 3.6 V (2) Output level up to supply VCC CMOS level: 1.65 V to 3.6 V (VCC = 3.6 V) (3) Output level down to supply VCC CMOS level: 3.6 V to 2.3 V (VCC = 2.3 V) (4) 3.6 V tolerant inputs (5) 3.6 V power down protection output 3. Packaging USV 4. Marking and Pin Assignment Marking Pin Assignment (Top view) Start of commercial production
©2018
Toshiba Electronic Devices & Storage Corporation 1 2018-10
2018-06-18
Rev.1.0 7UL1T02FU
5. IEC Logic Symbol 6. Truth Table
A B Y L L H L H L H L L H H L 7. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 )
Characteristics Symbol Note Rating Unit Supply voltage VCC -0.5 to 4.6 V Input voltage VIN -0.5 to 4.6 V (Note 1) -0.5 to 4.6 V (Note 2) -0.5 to VCC + 0.5 DC output voltage VOUT Input diode current IIK Output diode current IOK -20 mA -20 mA DC output current
VCC/ground current IOUT ±25 mA ICC ±50 mA (Note 3) Power dissipation PD 200 mW Storage temperature Tstg -65 to 150 Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even
destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note 1: VCC = 0 V
Note 2: High (H) or Low (L) state. IOUT absolute maximum rating must be observed.
…
