7UL1G08FU
CMOS Digital Integrated Circuits Silicon Monolithic 7UL1G08FU
1. Functional Description
• 2-Input AND Gate 2. Features
(1) High output current: ±8.0 mA (min) at VCC = 3.0 V (2) Super high speed operation: tpd = 2.5 ns (typ.) at VCC = 3.3 V, CL = 15 pF (3) Operation voltage range: VCC = 0.9 to 3.6 V (4) 3.6 V tolerant inputs (5) 3.6 V power down protection output 3. Packaging USV 4. Marking and Pin Assignment Marking Pin Assignment (Top view) Start of commercial production
©2018
Toshiba Electronic Devices & Storage Corporation 1 2018-08
2018-03-28
Rev.1.0 7UL1G08FU
5. IEC Logic Symbol 6. Truth Table
A B Y L L L L H L H L L H H H 7. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 )
Characteristics Symbol Note Rating Unit Supply voltage VCC -0.5 to 4.6 V Input voltage VIN -0.5 to 4.6 V (Note 1) -0.5 to 4.6 V (Note 2) -0.5 to VCC + 0.5 DC output voltage VOUT Input diode current IIK Output diode current IOK -20 mA -20 mA DC output current
VCC/ground current IOUT ±25 mA ICC ±50 mA (Note 3) Power dissipation PD 200 mW Storage temperature Tstg -65 to 150 Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even
destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note 1: VCC = 0 V
Note 2: High (H) or Low (L) state. IOUT absolute maximum rating must be observed. …
