Datasheet Analog Devices HMC680LP4E — Ficha de datos

HMC680LP4 / 680LP4E
v03.0609 BiCMOS MMIC 5-BIT DIGITAL
VARIABLE GAIN AMPLIFIER, 30 -400 MHz Typical Applications Features The HMC680LP4(E) is ideal for: TTL/CMOS compatible parallel or latched
parallel control interface • Cellular/3G Infrastructure High Output IP3: +40 dBm (At all gain settings) • WiBro / WiMAX / 4G Low Noise Figure: 5 dB • Microwave Radio & VSAT Wide Gain Control Range: 23 dB • Test Equipment and Sensors 24 Lead 4x4 mm SMT Package: 16 mm2 • IF & RF Applications Excellent State & Step Accuracy (±0.05 dB) General Description Functional Diagram The HMC680LP4(E) is a digitally controlled variable
gain amplifier which operates from 30 to 400 MHz,
and can be programmed to provide -4 dB to +19 dB
of gain, in 1 dB steps. The HMC680LP4(E) delivers
noise figure of 5 dB in its maximum gain state, with
output IP3 of up to +40 dBm in any state. This high
linearity DVGA also provides a differential RF output
which can be used to interface directly with SAW
filters in Tx and Rx applications, and with digital to
analog converters in Rx chains. The HMC680LP4(E)
is housed in a RoHS compliant 4x4 mm QFN leadless
package, and is CMOS/ TTL compatible. Variable gain amplifiers -digital -SMT 12 12 -1 Electrical Specifications, TA = +25° C, 50 Ohm System, Vdd = +5V
Parameter Min. Frequency Range
Gain (Maximum Gain State)
Gain Control Range 17 Typ. Max. Units 30 -400 MHz 19
23 dB
dB Input Return Loss 12 dB Output Return Loss 13 dB Gain Accuracy: (Referenced to Maximum Gain State) All Gain States ± (0.15 + 3% of Gain Setting) Max. Output Power for 1dB Compression
Output Third Order Intercept Point (Two-Tone Output Power= +5 dBm Each Tone) [1]
Output Second Order Intercept Point (Two-Tone Output Power= +5 dBm Each Tone) [1]
2nd Order …