Datasheet Texas Instruments TPS63805YFFT — Ficha de datos

FabricanteTexas Instruments
SerieTPS63805
Numero de parteTPS63805YFFT

2-A, convertidor buck-boost de baja corriente de alta eficiencia y baja eficiencia con tamaño de solución pequeño 15-DSBGA -40 a 125

Hojas de datos

TPS6380x 2-A, High-efficient, Low IQ Buck-boost Converter with Small Solution Size datasheet
PDF, 3.2 Mb, Revisión: B, Archivo publicado: nov 20, 2018

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin15
Package TypeYFF
Industry STD TermDSBGA
JEDEC CodeR-XBGA-N
Package QTY250
CarrierSMALL T&R
Device MarkingTPS63805
Thickness (mm)0.4
Pitch (mm)0.4
Max Height (mm)0.625
Mechanical DataDescargar

Paramétricos

Approx. price0.98 | 1ku US$
Duty cycle(Max)100 %
FeaturesEnable,Light Load Efficiency,Load Disconnect,Power Good,Pre-Bias Start-Up,Synchronous Rectification,UVLO Fixed
Iout(Max)2 A
Iq(Typ)0.011 mA
Operating temperature range-40 to 125 C
Package GroupDSBGA|15
RatingCatalog
Switch current limit(Min)3.9 A
Switch current limit(Typ)5 A
Switching frequency(Max)3100 kHz
Switching frequency(Min)500 kHz
TopologyBuck-Boost,Buck/Boost
TypeConverter
Vin(Max)5.5 V
Vin(Min)1.3 V
Vout(Max)5.2 V
Vout(Min)1.8 V

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: TPS63805EVM-026
    High Current; High Efficiency Buck-Boost Converter Evaluation Module
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • Prevent Battery Overdischarge with Precise Threshold Enable Pin
    PDF, 78 Kb, Archivo publicado: abr 2, 2019
    Using a buck-boost converter is a convenient way to obtain a fixed supply voltage within the wide voltage range of typical batteries used in low-power devices such as smart meters wearables or those in the Internet of Things.
  • Selecting the right DC/DC converter for maximum battery life
    PDF, 72 Kb, Archivo publicado: feb 8, 2019
    Choosing the best topology for a battery powered application such as IoT sensor smart lock or IP camera might not always be straightforward based on the available and required voltages alone.
  • Selecting a DC/DC Converter for Maximum Battery Life in Pulsed-Load Applications
    PDF, 155 Kb, Archivo publicado: nov 28, 2018
    When designing a battery powered system maximizing batterylife is one of the most important design goals. Battery powered systems such as smart meters IoT sensors or ireless medical equipment often require a power converter to obtain fixed supply voltages for time varying loads
  • Using Non-Inverting Buck-Boost Converter for Voltage Stabilization
    PDF, 734 Kb, Archivo publicado: agosto 1, 2019
  • Supercapacitor backup power supply with TPS63802
    PDF, 665 Kb, Archivo publicado: enero 21, 2019
  • Precise Delayed Start-up with Precise Threshold Enable-pin
    PDF, 188 Kb, Archivo publicado: abr 15, 2019
  • Low-power TEC driver
    PDF, 75 Kb, Archivo publicado: nov 18, 2014
    TPS63020 Low Power TEC Driver
  • Different methods to drive LEDs using TPS63xxx buck-boost converters (Rev. B)
    PDF, 86 Kb, Revisión: B, Archivo publicado: enero 12, 2012
  • Buck-boost Converter Battery Life Time Estimation for Wireless Network Cameras (Rev. A)
    PDF, 123 Kb, Revisión: A, Archivo publicado: mayo 28, 2019
  • Buck-Boost Converters Solving Power Challenges in Optical Modules
    PDF, 45 Kb, Archivo publicado: mayo 13, 2019
  • Improving Load Transient Response for Controlled Loads
    PDF, 338 Kb, Archivo publicado: sept 12, 2019
  • Extending the Soft Start Time in the TPS63010 Buck-Boost Converter
    PDF, 262 Kb, Archivo publicado: dic 5, 2012
  • Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B)
    PDF, 400 Kb, Revisión: B, Archivo publicado: jul 9, 2018
    This application note gives the equations to calculate the power stage of a non-inverting buck-boost converter built with an IC with integrated switches and operating in continuous conduction mode. See the references at the end of this document if more detail is needed.
  • Understanding Undervoltage Lockout in Power Devices (Rev. A)
    PDF, 90 Kb, Revisión: A, Archivo publicado: sept 19, 2018
    Many integrated circuits include an undervoltage lockout (UVLO) function to disable the device at low supply voltages. Below the minimum supply voltage the function and performance of a device may be undefined making it impossible to predict system behavior. This application note explains how to correctly understand the undervoltage lockout specification in the data sheets of TI's power products.
  • Design considerations for a resistive feedback divider in a DC/DC converter
    PDF, 393 Kb, Archivo publicado: abr 26, 2012
  • Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs
    PDF, 130 Kb, Archivo publicado: sept 19, 2011
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, Archivo publicado: jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, Revisión: A, Archivo publicado: dic 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Linea modelo

Serie: TPS63805 (2)

Clasificación del fabricante

  • Semiconductors > Analog and Mixed-Signal > Power management > DC/DC switching regulators > Buck-boost & inverting > Buck-boost, inverting & split-rail converters (integrated switch)