Datasheet Texas Instruments TPS63810YFFR — Ficha de datos

FabricanteTexas Instruments
SerieTPS63810
Numero de parteTPS63810YFFR

Convertidor buck-boost de alta eficiencia de 2.5 A con interfaz I²C 15-DSBGA -40 a 85

Hojas de datos

TPS63810 2.5-A Buck-Boost Converter with I2C Interface datasheet
PDF, 1.3 Mb, Archivo publicado: enero 12, 2018

Precios

Estado

Estado del ciclo de vidaVista previa (El dispositivo ha sido anunciado pero no está en producción. Las muestras pueden o no estar disponibles)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin15
Package TypeYFF
Industry STD TermDSBGA
JEDEC CodeR-XBGA-N
Package QTY3000
CarrierLARGE T&R
Thickness (mm)0.4
Pitch (mm)0.4
Max Height (mm)0.625
Mechanical DataDescargar

Paramétricos

Approx. price1.09 | 1ku US$
Duty cycle(Max)100 %
FeaturesDynamic Voltage Scaling,Enable,Light Load Efficiency,Load Disconnect,Output Discharge,Power Good,Pre-Bias Start-Up,Synchronous Rectification,UVLO Fixed
Iout(Max)2.5 A
Iq(Typ)0.013 mA
Operating temperature range-40 to 85 C
Package GroupDSBGA|15
RatingCatalog
Switch current limit(Min)5.2 A
Switch current limit(Typ)5.8 A
Switching frequency(Max)3100 kHz
Switching frequency(Min)500 kHz
TopologyBuck-Boost,Buck/Boost
TypeConverter
Vin(Max)5.5 V
Vin(Min)1.9 V
Vout(Max)5.2 V
Vout(Min)1.825 V

Plan ecológico

RoHSSee ti.com

Notas de aplicación

  • Improve Efficiency in TWS Earbuds with Buck-Boost Converter
    PDF, 86 Kb, Archivo publicado: sept 18, 2019
  • Selecting a DC/DC Converter for Maximum Battery Life in Pulsed-Load Applications
    PDF, 155 Kb, Archivo publicado: nov 28, 2018
    When designing a battery powered system maximizing batterylife is one of the most important design goals. Battery powered systems such as smart meters IoT sensors or ireless medical equipment often require a power converter to obtain fixed supply voltages for time varying loads
  • Prevent Battery Overdischarge with Precise Threshold Enable Pin
    PDF, 78 Kb, Archivo publicado: abr 2, 2019
    Using a buck-boost converter is a convenient way to obtain a fixed supply voltage within the wide voltage range of typical batteries used in low-power devices such as smart meters wearables or those in the Internet of Things.
  • Selecting the right DC/DC converter for maximum battery life
    PDF, 72 Kb, Archivo publicado: feb 8, 2019
    Choosing the best topology for a battery powered application such as IoT sensor smart lock or IP camera might not always be straightforward based on the available and required voltages alone.
  • Supercapacitor backup power supply with TPS63802
    PDF, 665 Kb, Archivo publicado: enero 21, 2019
  • Using Non-Inverting Buck-Boost Converter for Voltage Stabilization
    PDF, 734 Kb, Archivo publicado: agosto 1, 2019
  • Precise Delayed Start-up with Precise Threshold Enable-pin
    PDF, 188 Kb, Archivo publicado: abr 15, 2019
  • Buck-boost Converter Battery Life Time Estimation for Wireless Network Cameras (Rev. A)
    PDF, 123 Kb, Revisión: A, Archivo publicado: mayo 28, 2019
  • Buck-Boost Converters Solving Power Challenges in Optical Modules
    PDF, 45 Kb, Archivo publicado: mayo 13, 2019
  • Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B)
    PDF, 400 Kb, Revisión: B, Archivo publicado: jul 9, 2018
    This application note gives the equations to calculate the power stage of a non-inverting buck-boost converter built with an IC with integrated switches and operating in continuous conduction mode. See the references at the end of this document if more detail is needed.

Linea modelo

Serie: TPS63810 (2)

Clasificación del fabricante

  • Semiconductors > Analog and Mixed-Signal > Power management > DC/DC switching regulators > Buck-boost & inverting > Buck-boost, inverting & split-rail converters (integrated switch)