Datasheet STMicroelectronics ALED1262ZT — Ficha de datos

FabricanteSTMicroelectronics
SerieALED1262ZT

Automotive-grade 12-channel LED driver with open detection, local dimming, busdriven and standalone operations

Hojas de datos

Datasheet ALED1262ZT
PDF, 3.4 Mb, Idioma: en, Archivo subido: oct 21, 2019, Páginas: 69
Automotive-grade 12-channel LED driver with open detection, local dimming, busdriven and standalone operations
Legajo

Precios

Descripción detallada

The ALED1262ZT is a monolithic 12 output LED driver designed for automotive exterior and interior lighting applications.

The ALED1262ZT guarantees 19 V output driving capability allowing users to connect several LEDs in series. In the output stage, twelve regulated current sources provide from 6 mA to 60 mA constant current to drive LEDs. The current is programmed by a single external resistor. In the ALED1262ZT, LED open error detection is available.

The brightness can be adjusted separately for each channel through a 7-bit grayscale control. A slow turn-on and turn-off time improves the system low noise generation performance. Moreover the gradual output delay reduces the inrush current. To further increase EMI performance, this device implements an internal clock dithering to have a spread spectrum noise reduction. Thermal management is equipped with overtemperature data alert and the output thermal shutdown (170 °C). The I²C high clock frequency, up to 400 kHz, makes the device suitable for high data rate transmissions. The supply voltage range is between 5.5 V and 38 V avoiding any external pre-regulation or additional load dump protection on the power supply stage. This device can operate in bus-driven mode (BDM) using I²C interface or in standalone mode (SAM) using internal custom configuration by OTP.

Estado

ALED1262ZTTR
Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)

Embalaje

ALED1262ZTTR
PackageHTSSOP24

Linea modelo

Serie: ALED1262ZT (1)

Clasificación del fabricante