Datasheet Renesas IMX3112 — Ficha de datos

Short-Form Datasheet
IMX3112
I3C Basic 1:2 Bus Multiplexer Description Features The IMX3112 is a dual bidirectional 1:2 translating
multiplexer for I3C/I²C bus. The input HSDA/HSCL
pair can fan out to two output pairs (or channels),
either individual output channel can be selected. • 1:2 bus multiplexer • Two-wire programmable I²C or I3C bus serial
interface • Single device load on the Host bus • Up to 12.5MHz transfer rate • Single 1.8V power supply input • 1.0V VLDO output at VIO pin • Supports 1.0V, 1.1V, and 1.2V Push-Pull IO
levels • Supports 1.0V, 1.1V, 1.2V, 1.8V, 2.5V, and 3.3V
open-drain IO levels • Integrated Temperature Sensor; 0.5°C accuracy
with 0.25°C resolution • Packet Error Check (PEC) function • Parity Error Check function • Bus reset function • In-band Interrupt (IBI) • Up to 8 unique addressing • Programmable I²C, I3C bus addressing scheme • 9-pin thermally enhanced DFN package • Temperature: Industrial range of -40 °C to 125°C Applications with slave devices that share the same
address can use this multiplexer to prevent slave
address conflicts. By selecting the proper output
channel, the I3C/I²C master can access a large
number of devices across both ports. Figure 1. Block Diagram Applications Feb.27.20 • Pin reduction in host or ASIC or platform
controllers • Server boards • PCs/notebooks • Embedded automation Page 1 IMPORTANT NOTICE AND DISCLAIMER
RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL
SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING
REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND
OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.
These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible
for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3) …