Datasheet Analog Devices HMC675LP3ETR — Ficha de datos

HMC675LP3E COMPARATORS -SMT v02.0312 10 GHz LATCHED COMPARATOR
WITH RSCML OUTPUT STAGE Typical Applications Features The HMC675LP3E is ideal for: Equivalent Input Bandwidth: 10 GHz • ATE Applications Propagation Delay: 100 ps • High Speed Instrumentation Overdrive & Slew Rate Dispersion: 10 ps • Digital Receiver Systems Minimum Pulse Width: 60 ps • Pulse Spectroscopy Resistor Programmable Hysteresis • High Speed Trigger Circuits Differential Latch Control • Clock & Data Restoration Power Dissipation: 100 mW
RSPECL and RSECL Versions Available
16 Lead 3x3 mm SMT Package: 9 mm 2 Functional Diagram General Description
The HMC675LP3E is a SiGe monolithic, ultra fast
comparator that features reduced swing (RS) CML
output drivers and latch inputs. The comparator
supports 10 Gbps operation while providing 100 ps
propagation delay and 60 ps minimum pulse width with
0.2 ps rms random jitter (RJ). Overdrive and slew rate
dispersion are typically 10 ps, making the device ideal
for a wide range of applications from ATE to broadband
communications. The reduced swing CML output stage
is designed to directly drive 400 mV into 50 ohms
terminated to GND. The HMC675LP3E features high
speed latch and programmable hysteresis and may
be configured to operate in either latch mode, or as a
tracking comparator. Electrical Specifications, TA = +25 °C, Vcci= +3.3 V, Vcco = 0 V, Vee = -3 V, VTERM = 0 V
Parameter Conditions Input Voltage Range
Input Differential Voltage Typ. Max Units -2 2 V -1.75 1.75 V Input Offset Voltage ±5 mV Input Offset Voltage, Temperature Coefficient 15 µV / °C Input Bias Current 15 uA Input Bias Current Temperature Coefficient 50 nA / °C Input Offset Current 4 µA Input Impedance 50 Ω Common Mode Input Impedance 350 KΩ Differential Input Impedance 15 KΩ Active Gain 43 dB Common Mode Rejection Ratio 80 dB ±1 mV Hysteresis 1 Min. Rhys = ∞ Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place …