Datasheet Arlight ARL-5613RGBW/4A — Ficha de datos

ARL-5613RGBW/4A
Package Dimensions Features
• UNIFORMLIGHT OUTPUT
• LOWPOWERCONSUMPTION
• I.C.COMPATIBLE
• LONGLIFE-SOLIDSTATERELIAILITY
• Common Anode Notes: Other dimensions are in millimeters, tolerance is
0.25mm except being specified.
˙ Protruded resin under flange is 1.5mm Max LED Bare copper alloy is exposed at tie-bar portion after
cutting. Description
• The Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode
• The Green source color devices are made with InGaN on sic Light Emitting Diode
• The Blue source color devices are made with InGaA1N on sic Light Emitting Diode. Usage Notes Applications The ultra bright LED is an electrostatic insensitive device,
so static electricity and surge will damage the LED.It is
required to wear a wrist-band when handling the LED. All
device, equipment, machinery, desk and ground must be
properly grounded
˙When using LED, it must use a protective resistor in series
with DC current about 20mA • Status indicators
• Commercial use
• Advertising Signs
• Back lighting Absolute Maximum Rating (Ta=25oC)
Parameter Symbol Absolute Maximum Rating Units Forward Pulse Current IFPM R :60 G: 100 B: 100 mA Forward Current IFM 20 mA Reverse Voltage VR 5 V Power Dissipation PD R :60 G: 130 B: 130 mW Operating Temperature Topr -40 ~ +80 o Storage Temperature Tstg -40 ~ +100 o Tsol Reflow Soldering : 260 C for 10 sec. …