TCTH0xxxE Series
TOSHIBA CMOS Linear Integrated Circuit Silicon Monolithic TCTH0xxxE Series
ThermoflaggerTM (Over Temperature Detection IC)
The TCTH0xxxE series are the CMOS process IC outputs abnormal-state signal on
detecting over temperature as the resistor value changing of external PTC
Thermistor.
Output current to PTC thermistor is 1 μA (Typ.) and whole current
consumption is 1.8 μA (Typ.), low consumption operation is realised.
(TCTH01xxE)
Selectable Push-pull type, or Open-drain type for FLAG signal output
by product.
Also, Selectable Auto retry type if PTC thermistor temperature goes down
back to lower than threshold, or Latch the abnormal signal type.
IC package is ESV (1.6 mm x 1.6 mm x 0.55 mm).
ESV
Weight: 2.98 mg (Typ.) Application (Ex)
• Notebook PC, Mobile equipment, home appliance, Industry equipment
etc. for over temperature detection. Feature
• Selectable PTCO output current IPTCO = 1 μA (TCTH01xxE, Typ.)
IPTCO = 10 μA (TCTH02xxE, Typ.) • High PTCO output current accuracy ±8 % (VDD = 3.3 V, 25 °C) • Low current consumption IDD= 1.8 μA (TCTH01xxE, Typ.) • FLAG signal latch function (TCTH0x2xE) • FLAG signal output (PTCGOOD) IDD= 11.3 μA (TCTH02xxE, Typ.) TCTH0xxAE: Push-pull type
TCTH0xxBE: Open-drain type
• Standard package ESV (SOT-553) (1.6 mm x 1.6 mm x 0.55 mm) “ThermoflaggerTM” is a trademark of Toshiba Electronic Devices & Storage Corporation. Start of commercial production 2023-02 © 2023
Toshiba Electronic Devices & Storage Corporation 1 2023-04-25 …