Datasheet Mini-Circuits MAR-1+ — Ficha de datos

Drop-In Monolithic Amplifier DC-1 GHz Product Features
• Wideband, DC to 1 GHz
• High gain, 17.8 dB typ. at 0.1 GHz
• Internally Matched to 50 Ohms
• Low noise figure, 3.5 dB typ.
• Exact foot print substitute for MSA-0185
• Low current, 17mA
• Cascadable, unconditionally stable
• Aqueous washable
• Protected by US Patent 6,943,629 Generic photo used for illustration purposes only MAR-1+
CASE STYLE: VV105 +RoHS Compliant Typical Applications The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications • Cellular
• PCN instrumentation General Description MAR-1+ (RoHS compliant) is a wideband amplifier offering high dynamic range. It has repeatable performance from lot to lot. It is enclosed in a Micro-X package. MAR-1+ uses Darlington configuration and is
fabricated using InGaP HBT technology. Expected MTTF is 15,000 years at 85°C case temperature. simplified schematic and pin description
RF-OUT and DC-IN RF-OUT and DC-IN
3 RF IN
GND 4 GND
2
1
RF IN GROUND Function Pin Number Description RF IN 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen
for the frequency of operation. RF-OUT and DC-IN 3 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking
capacitor is necessary for proper operation. An RF choke is needed to feed DC bias
without loss of RF signal due to the bias connection, as shown in “Recommended …