Datasheet AT91SAM9260B-CU - Atmel ARM Microcontrollers (MCU) 32- bit — Ficha de datos

Atmel AT91SAM9260B-CU

Part Number: AT91SAM9260B-CU

Descripción detallada

Manufacturer: Atmel

Description: ARM Microcontrollers (MCU) 32- bit

data sheetDownload Data Sheet

Docket:
Features
· 180 MHz ARM926EJ-STM ARM® Thumb® Processor
­ 8 KBytes Data Cache, 8 KBytes Instruction Cache, MMU
· Memories
­ 32-bit External Bus Interface supporting 4-bank SDRAM/LPSDR, Static Memories, CompactFlash, SLC NAND Flash with ECC ­ Two 4-kbyte internal SRAM, single-cycle access at system speed ­ One 32-kbyte internal ROM, embedding bootstrap routine Peripherals ­ ITU-R BT.

601/656 Image Sensor Interface ­ USB Device and USB Host with dedicated On-Chip Transceiver ­ 10/100 Mbps Ethernet MAC Controller ­ One High Speed Memory Card Host ­ Two Master/Slave Serial Peripheral Interfaces ­ Two Three-channel 32-bit Timer/Counters ­ One Synchronous Serial Controller ­ One Two-wire Interface ­ Four USARTs ­ Two UARTs ­ 4-channel 10-bit ADC System ­ 90 MHz six 32-bit layer AHB Bus Matrix ­ 22 Peripheral DMA Channels ­ Boot from NAND Flash, SDCard, DataFlash® or serial DataFlash ­ Reset Controller with On-Chip Power-on Reset ­ Selectable 32,768 Hz Low-Power and 3-20 MHz Main Oscillator ­

Specifications:

  • A/D Channels Available: 4
  • Clock Frequency Max: 210 MHz
  • Core: ARM926EJ-S
  • Data Bus Width: 32 bit
  • Data ROM Size: 32 Kb
  • Height: 0.86 mm
  • Interface: 2-Wire, EBI, ISI, JTAG, MCI, SPI, USB
  • Length: 15 mm
  • Mounting Style: SMD/SMT
  • Number of I/O Lines: 96
  • Number of Timers: 5
  • Number of bits in ADC: 10 bit
  • On-Chip ADC: Yes
  • Operating Supply Voltage: 2 V to 4 V
  • Operating Temperature Range: - 40 C to + 85 C
  • Package / Case: BGA-217
  • Processor Series: AT91SAMx
  • Program Memory Size: 32 Kb
  • Program Memory Type: Flash, SRAM
  • RAM Size: 4 Kb
  • Supply Voltage - Max: 4 V
  • Supply Voltage - Min: 2 V
  • Width: 15 mm
  • RoHS: Yes

Otros nombres:

AT91SAM9260BCU, AT91SAM9260B CU