Datasheet Texas Instruments XTR110KPG4 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | XTR110 |
| Numero de parte | XTR110KPG4 |
Transmisor / convertidor de voltaje a corriente de precisión 16-PDIP -40 a 85
Hojas de datos
Precision Voltage-To-Current Converter/Transmitter datasheet
PDF, 800 Kb, Revisión: C, Archivo publicado: sept 11, 2009
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 16 |
| Package Type | N |
| Industry STD Term | PDIP |
| JEDEC Code | R-PDIP-T |
| Package QTY | 25 |
| Carrier | TUBE |
| Device Marking | XTR110KP |
| Width (mm) | 6.35 |
| Length (mm) | 19.3 |
| Thickness (mm) | 3.9 |
| Pitch (mm) | 2.54 |
| Max Height (mm) | 5.08 |
| Mechanical Data | Descargar |
Paramétricos
| Full Scale Input Range | 0 to 10V |
| Operating Temperature Range | -40 to 85 C |
| Package Group | PDIP |
| Package Size: mm2:W x L | See datasheet (PDIP) PKG |
| Rating | Catalog |
| Sub-Family | 4-20mA Transmitter |
| Vs(Max) | 40 V |
| Vs(Min) | 13.5 V |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: DLPNIRSCANEVM
DLPВ® NIRscanВ™ Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Implementing a 4 mA to 20 mA Current Loop on TI DSPsPDF, 204 Kb, Archivo publicado: enero 5, 2004
Use of 4-mA to 20-mA (4-20 mA) current loops has become the standard in the process-control industry due to their increased resistance to noise compared to voltage-modulated signals. TI digital signal processors (DSPs) increasingly are becoming the standard for microcontrollers in a control application. Therefore, an opportunity exists to connect the many sensors and electromechanical devices on t - Use Low-Impedance Bridges on 4-20mA Current LoopPDF, 27 Kb, Archivo publicado: sept 27, 2000
If you need more transducer excitation current than is available on a standard 4-20mA 2-wire current loop, consider a 3-wire transmitter. A 2-wire 4-20mA transmitter uses the same two wires for signal and power. Part of the 4mA minimum loop current is used to power the transmitter circuitry. The remaining current can be used for transducer excitation. In some applications even the entire 4mA is no - 20mA to 0-20mA Converter & Current Summing Current-to-Current ConvertersPDF, 57 Kb, Archivo publicado: oct 2, 2000
Current loops have become the standard for signal transmission in the process control industry. Current loops are insensitive to noise and are immune to errors from line impedance. Burr-Brown offers a complete line of monolithic 4mA to 20mA current loop transmitters and receivers. - Implementation and Applications of Current Sources and Current ReceiversPDF, 427 Kb, Archivo publicado: sept 27, 2000
This application guide is intended as a source book for the design and application of: Current sourcesCurrent sinksFloating current sourcesVoltage-to-current converters(transconductance amplifiers)Current-to-current converters (current mirrors)Current-to-voltage converters(transimpedance amplifiers)
Linea modelo
Serie: XTR110 (8)
- XTR110AG XTR110BG XTR110KP XTR110KPG4 XTR110KU XTR110KU/1K XTR110KU/1KG4 XTR110KUG4
Clasificación del fabricante
- Semiconductors > Sensing Products > Application-Specific Sensor Signal Conditioners