Datasheet MAX4241ESA+ - Maxim IC, OP AMP, BEYOND THE RAILS, SINGLE — Ficha de datos

Maxim MAX4241ESA+

Part Number: MAX4241ESA+

Descripción detallada

Manufacturer: Maxim

Description: IC, OP AMP, BEYOND THE RAILS, SINGLE

data sheetDownload Data Sheet

Docket:
19-1343; Rev 3; 9/06
Single/Dual/Quad, +1.8V/10µA, SOT23, Beyond-the-Rails Op Amps
General Description
The MAX4240­MAX4244 family of micropower op amps operate from a single +1.8V to +5.5V supply or dual ±0.9V to ±2.75V supplies and have Beyond-the-RailsTM inputs and rail-to-rail output capabilities.

These amplifiers provide a 90kHz gain-bandwidth product while using only 10µA of supply current per amplifier. The MAX4241/MAX4243 have a low-power shutdown mode that reduces supply current to less than 1µA and forces the output into a high-impedance state. Although the minimum operating voltage is specified at +1.8V, these devices typically operate down to +1.5V. The combination of ultra-low-voltage operation, beyond-the-rails inputs, rail-to-rail outputs, and ultra-low power consumption makes these devices ideal for any portable/ two-cell battery-powered system. These amplifiers have an input common-mode range that extends 200mV beyond each rail, and their outputs typically swing to wit

Simulation ModelSimulation Model

Specifications:

  • Bandwidth: 90 kHz
  • Gain Bandwidth: 90 MHz
  • I/O Type: Rail-Rail Outputs
  • Input Offset Voltage Max: 0.75 mV
  • Mounting Type: SMD
  • Number of Amplifiers: 1
  • Number of Pins: 8
  • Op Amp Type: Low Power
  • Operating Temperature Range: -40°C to +85°C
  • Package / Case: SOIC
  • SVHC: No SVHC (18-Jun-2010)
  • Slew Rate: 0.04 V/µs
  • Supply Voltage + Nom: 6 V
  • Supply Voltage Range: пїЅпїЅ 0.9 V to ± 2.75 V

RoHS: Yes

Accessories:

  • BONKOTE - BON102
  • Roth Elektronik - RE932-01