Datasheet Texas Instruments OPA234UAG4 — Ficha de datos

FabricanteTexas Instruments
SerieOPA234
Numero de parteOPA234UAG4
Datasheet Texas Instruments OPA234UAG4

Amplificadores operacionales de baja potencia y precisión de un solo suministro 8-SOIC -40 a 125

Hojas de datos

OPA234, 2234, 4234: Low Power, Precision Single-Supply Operational Amplifiers datasheet
PDF, 1.0 Mb, Revisión: B, Archivo publicado: abr 10, 2008
Extracto del documento

Precios

Estado

Estado del ciclo de vidaObsoleto (El fabricante ha interrumpido la producción del dispositivo)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin8
Package TypeD
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Width (mm)3.91
Length (mm)4.9
Thickness (mm)1.58
Pitch (mm)1.27
Max Height (mm)1.75
Mechanical DataDescargar

Paramétricos

Additional FeaturesVos Adj Pin
Approx. Price (US$)1.40 | 1ku
ArchitectureBipolar
CMRR(Min)(dB)86
CMRR(Typ)(dB)106
GBW(Typ)(MHz)0.35
Input Bias Current(Max)(pA)30000
Iq per channel(Max)(mA)0.3
Iq per channel(Typ)(mA)0.25
Number of Channels(#)1
Offset Drift(Typ)(uV/C)0.5
Operating Temperature Range(C)-40 to 125
Output Current(Typ)(mA)11
Package GroupSOIC
Package Size: mm2:W x L (PKG)See datasheet (PDIP)
Rail-to-RailIn to V-
Out
RatingCatalog
Slew Rate(Typ)(V/us)0.2
Total Supply Voltage(Max)(+5V=5, +/-5V=10)36
Total Supply Voltage(Min)(+5V=5, +/-5V=10)2.7
Vn at 1kHz(Typ)(nV/rtHz)25
Vos (Offset Voltage @ 25C)(Max)(mV)0.1

Plan ecológico

RoHSDesobediente
Pb gratisNo

Notas de aplicación

  • Stop-band limitations of the Sallen-Key, low-pass filter
    PDF, 573 Kb, Archivo publicado: oct 22, 2008
  • Q4 2008 Issue Analog Applications Journal
    PDF, 1.5 Mb, Archivo publicado: oct 22, 2008
  • Remove the DC Portion of Signals with the ADS7817
    PDF, 55 Kb, Archivo publicado: sept 27, 2000
    Unwanted portions of a signal, such as a DC pedestal, can be difficult to reject in a single supply circuit. A DC pedestal voltage most typically appears at the output of an operational amplifier with a small signal riding on top of it. This pedestal voltage is required in the analog domain to insure that the small signal that contains the pertinent information never falls below the ground potenti
  • Tuning in Amplifiers
    PDF, 44 Kb, Archivo publicado: oct 2, 2000
    Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil
  • Single-Supply Operation of Operational Amplifiers
    PDF, 77 Kb, Archivo publicado: oct 2, 2000
    Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation.
  • Op Amp Performance Analysis
    PDF, 76 Kb, Archivo publicado: oct 2, 2000
    This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte

Linea modelo

Clasificación del fabricante

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps