Datasheet PCA9622DR,118 - NXP — Ficha de datos

Part Number: PCA9622DR,118

Descripción detallada

Manufacturer: NXP

Docket:
PCA9622
16-bit Fm+ I2C-bus 100 mA 40 V LED driver
Rev.

03 -- 31 August 2009 Product data sheet
1. General description
The PCA9622 is an I2C-bus controlled 16-bit LED driver optimized for voltage switch dimming and blinking 100 mA Red/Green/Blue/Amber (RGBA) LEDs. Each LED output has its own 8-bit resolution (256 steps) fixed frequency individual PWM controller that operates at 97 kHz with a duty cycle that is adjustable from 0 % to 99.6 % to allow the LED to be set to a specific brightness value. An additional 8-bit resolution (256 steps) group PWM controller has both a fixed frequency of 190 Hz and an adjustable frequency between 24 Hz to once every 10.73 seconds with a duty cycle that is adjustable from 0 % to 99.6 % that is used to either dim or blink all LEDs with the same value. Each LED output can be off, on (no PWM control), set at its individual PWM controller value or at both individual and group PWM controller values. The PCA9622 operates with a supply voltage range of 2.3 V

Specifications:

Dimming Control Type: PWM
Input Voltage Range: 2.3 V to 5.5 V
Number of Outputs: 16
Operating Temperature Range: -40°C to +85°C
Output Current: 100 mA
Output Voltage: 40 V
Package / Case: TSSOP
Switching Frequency: 1 MHz

RoHS: Yes

Otros nombres:

PCA9622DR118, PCA9622DR 118