Datasheet MCP6041, MCP6042, MCP6043, MCP6044 (Microchip)

FabricanteMicrochip
DescripciónОperational amplifier (op amp) has a gain bandwidth product of 14 kHz with a low typical operating current of 600 nA and an offset voltage that is less than 3 mV
Páginas / Página40 / 1 — MCP6041/2/3/4. 600 nA, Rail-to-Rail Input/Output Op Amps. Features. …
Formato / tamaño de archivoPDF / 1.2 Mb
Idioma del documentoInglés

MCP6041/2/3/4. 600 nA, Rail-to-Rail Input/Output Op Amps. Features. Description. Applications. Design Aids. Package Types. MCP6041

Datasheet MCP6041,  MCP6042,  MCP6043,  MCP6044 Microchip

Línea de modelo para esta hoja de datos

Versión de texto del documento

MCP6041/2/3/4 600 nA, Rail-to-Rail Input/Output Op Amps Features Description
• Low Quiescent Current: 600 nA/amplifier (typical) The MCP6041/2/3/4 family of operational amplifiers • Rail-to-Rail Input/Output (op amps) from Microchip Technology Inc. operate with • Gain Bandwidth Product: 14 kHz (typical) a single supply voltage as low as 1.4V, while drawing less than 1 µA (maximum) of quiescent current per • Wide Supply Voltage Range: 1.4V to 6.0V amplifier. These devices are also designed to support • Unity Gain Stable rail-to-rail input and output operation. This combination • Available in Single, Dual, and Quad of features supports battery-powered and portable • Chip Select (CS) with MCP6043 applications. • Available in 5-lead and 6-lead SOT-23 Packages The MCP6041/2/3/4 amplifiers have a gain-bandwidth • Temperature Ranges: product of 14 kHz (typical) and are unity gain stable. - Industrial: -40°C to +85°C These specifications make these op amps appropriate for low frequency applications, such as battery current - Extended: -40°C to +125°C monitoring and sensor conditioning.
Applications
The MCP6041/2/3/4 family operational amplifiers are offered in single (MCP6041), single with Chip Select • Toll Booth Tags (CS) (MCP6043), dual (MCP6042), and quad • Wearable Products (MCP6044) configurations. The MCP6041 device is • Temperature Measurement available in the 5-lead SOT-23 package, and the MCP6043 device is available in the 6-lead SOT-23 • Battery Powered package.
Design Aids Package Types
• SPICE Macro Models
MCP6041 MCP6043
• FilterLab® Software PDIP, SOIC, MSOP PDIP, SOIC, MSOP • MAPS (Microchip Advanced Part Selector) NC 1 8 NC NC 1 8 CS • Analog Demonstration and Evaluation Boards V 2 7 IN– VDD V 2 7 V • Application Notes IN– DD VIN+ 3 6 VOUT V 3 IN+ 6 VOUT
Related Devices
VSS 4 5 NC V 4 SS 5 NC • MCP6141/2/3/4: G = +10 Stable Op Amps
MCP6041 MCP6043
SOT-23-5 SOT-23-6
Typical Application
V 1 5 V OUT DD V 1 6 V OUT DD 2 2 5 CS I VSS VSS DD VDD V 3 IN+ 3 4 VIN– VIN+ 4 VIN– 1.4V 10 to
MCP6042 MCP6044
VOUT 6.0V PDIP, SOIC, MSOP PDIP, SOIC, TSSOP
MCP604X
100 k V 1 8 V V 1 14 OUTA V DD OUTA OUTD V 2 7 V V 2 13 V 1 M INA– OUTB INA– IND– V V 3 12 V INA+ 3 6 VINB– INA+ IND+ V 4 5 V V 4 11 VSS V – V SS INB+ DD DD OUT I = --------------------- V 5 10 V DD  INB+ INC+ 10 V/V  10 V 6 INB– 9 VINC–
High Side Battery Current Sensor
V 7 OUTB 8 VOUTC  2001-2013 Microchip Technology Inc. DS21669D-page 1 Document Outline 1.0 Electrical Characteristics FIGURE 1-1: Chip Select (CS) Timing Diagram (MCP6043 only). 1.1 Test Circuits FIGURE 1-2: AC and DC Test Circuit for Most Non-Inverting Gain Conditions. FIGURE 1-3: AC and DC Test Circuit for Most Inverting Gain Conditions. 2.0 Typical Performance Curves FIGURE 2-1: Input Offset Voltage. FIGURE 2-2: Input Offset Voltage Drift with TA = -40°C to +85°C. FIGURE 2-3: Input Offset Voltage vs. Common Mode Input Voltage with VDD = 1.4V. FIGURE 2-4: Input Offset Voltage Drift with TA = +85°C to +125°C and VDD = 1.4V. FIGURE 2-5: Input Offset Voltage Drift with TA = +25°C to +125°C and VDD = 5.5V. FIGURE 2-6: Input Offset Voltage vs. Common Mode Input Voltage with VDD = 5.5V. FIGURE 2-7: Input Offset Voltage vs. Output Voltage. FIGURE 2-8: Input Noise Voltage Density vs. Frequency. FIGURE 2-9: CMRR, PSRR vs. Frequency. FIGURE 2-10: The MCP6041/2/3/4 family shows no phase reversal. FIGURE 2-11: Input Noise Voltage Density vs. Common Mode Input Voltage. FIGURE 2-12: CMRR, PSRR vs. Ambient Temperature. FIGURE 2-13: Input Bias, Offset Currents vs. Ambient Temperature. FIGURE 2-14: Open-Loop Gain, Phase vs. Frequency. FIGURE 2-15: DC Open-Loop Gain vs. Power Supply Voltage. FIGURE 2-16: Input Bias, Offset Currents vs. Common Mode Input Voltage. FIGURE 2-17: DC Open-Loop Gain vs. Load Resistance. FIGURE 2-18: DC Open-Loop Gain vs. Output Voltage Headroom. FIGURE 2-19: Channel-to-Channel Separation vs. Frequency (MCP6042 and MCP6044 only). FIGURE 2-20: Gain Bandwidth Product, Phase Margin vs. Ambient Temperature with VDD = 1.4V. FIGURE 2-21: Quiescent Current vs. Power Supply Voltage. FIGURE 2-22: Gain Bandwidth Product, Phase Margin vs. Common Mode Input Voltage. FIGURE 2-23: Gain Bandwidth Product, Phase Margin vs. Ambient Temperature with VDD = 5.5V. FIGURE 2-24: Output Short Circuit Current vs. Power Supply Voltage. FIGURE 2-25: Output Voltage Headroom vs. Output Current Magnitude. FIGURE 2-26: Slew Rate vs. Ambient Temperature. FIGURE 2-27: Small Signal Non-inverting Pulse Response. FIGURE 2-28: Output Voltage Headroom vs. Ambient Temperature. FIGURE 2-29: Maximum Output Voltage Swing vs. Frequency. FIGURE 2-30: Small Signal Inverting Pulse Response. FIGURE 2-31: Large Signal Non-inverting Pulse Response. FIGURE 2-32: Chip Select (CS) to Amplifier Output Response Time (MCP6043 only). FIGURE 2-33: Input Current vs. Input Voltage (below VSS). FIGURE 2-34: Large Signal Inverting Pulse Response. FIGURE 2-35: Chip Select (CS) Hysteresis (MCP6043 only). 3.0 Pin Descriptions TABLE 3-1: Pin Function Table 3.1 Analog Outputs 3.2 Analog Inputs 3.3 Chip Select Digital Input 3.4 Power Supply Pins 4.0 Applications Information 4.1 Rail-to-Rail Input FIGURE 4-1: Simplified Analog Input ESD Structures. FIGURE 4-2: Protecting the Analog Inputs. 4.2 Rail-to-Rail Output 4.3 Output Loads and Battery Life 4.4 Capacitive Loads FIGURE 4-3: Output Resistor, RISO Stabilizes Large Capacitive Loads. FIGURE 4-4: Recommended RISO Values for Capacitive Loads. 4.5 MCP6043 Chip Select 4.6 Supply Bypass 4.7 Unused Op Amps FIGURE 4-5: Unused Op Amps. 4.8 PCB Surface Leakage FIGURE 4-6: Example Guard Ring Layout for Inverting Gain. 4.9 Application Circuits FIGURE 4-7: High-Side Battery Current Sensor. FIGURE 4-8: Two Op Amp Instrumentation Amplifier. 5.0 Design Aids 5.1 SPICE Macro Model 5.2 FilterLab® Software 5.3 MAPS (Microchip Advanced Part Selector) 5.4 Analog Demonstration and Evaluation Boards 5.5 Application Notes 6.0 Packaging Information 6.1 Package Marking Information Appendix A: Revision History Product Identification System Trademarks Worldwide Sales and Service