Datasheet MIC7111 (Microchip)

FabricanteMicrochip
DescripciónThe MIC7111 is a micropower operational amplifier featuring rail-to-rail input and output performance in Micrel's IttyBitty SOT-23-5 package
Páginas / Página12 / 1 — MIC7111. 1.8V to 11V, 15µA, 25kHz GBW, Rail-to-Rail
Formato / tamaño de archivoPDF / 610 Kb
Idioma del documentoInglés

MIC7111. 1.8V to 11V, 15µA, 25kHz GBW, Rail-to-Rail

Datasheet MIC7111 Microchip

Línea de modelo para esta hoja de datos

Versión de texto del documento

MIC7111
1.8V to 11V, 15µA, 25kHz GBW, Rail-to-Rail
Input and Output Operational Amplifier General Description Features The MIC7111 is a low-power operational amplifier with railto-rail inputs and outputs. The device operates from a 1.8V
to 11V single supply or an ±0.9V to ±5.5V dual supply. The
device consumes a low 15µA of current from a 1.8V supply
and 25µA from a 10V supply. The device features a unity
gain bandwidth of 25kHz and swings within 1mV of either
the supply rail with a 100kΩ load. The device is capable of
sinking and sourcing 25mA of current from a 1.8V supply
and up to 200mA from a 10V supply. The device is
available in the cost effective SOT23-5 package. •







• Datasheets and support documentation are available on
Micrel’s web site at: www.micrel.com. 1.8V to 11V single supply operation
±0.9V to ±5.5V dual supply operation
Low 15µA supply current at 1.8V
25kHz gain bandwidth
1mV input offset voltage (typical)
1pA input bias current (typical)
0.01pA input offset current (typical)
Input-referred noise is 110nv/√Hz at 1kHz
Output swing to within 1mV of rails with 1.8V supply and
100kΩ load
• Suitable for driving capacitive loads
• Cost effective SOT23-5 package Applications




• Wireless and cellular communications
GaAs RF bias amplifier
Current sensing for battery chargers
Transducer linearization and interface
Portable computing Functional Configuration SOT-23-5 (M5) Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com February 11, 2013 Revision 2.0