Datasheet LTC5508 (Analog Devices) - 2

FabricanteAnalog Devices
Descripción300MHz to 7GHz RF Power Detector with Buffered Output in SC70 Package
Páginas / Página8 / 2 — ABSOLUTE AXI U. RATI GS. PACKAGE/ORDER I FOR ATIO. (Note 1). ELECTRICAL …
Formato / tamaño de archivoPDF / 264 Kb
Idioma del documentoInglés

ABSOLUTE AXI U. RATI GS. PACKAGE/ORDER I FOR ATIO. (Note 1). ELECTRICAL CHARACTERISTICS The

ABSOLUTE AXI U RATI GS PACKAGE/ORDER I FOR ATIO (Note 1) ELECTRICAL CHARACTERISTICS The

Línea de modelo para esta hoja de datos

Versión de texto del documento

LTC5508
W W W U U W U ABSOLUTE AXI U RATI GS PACKAGE/ORDER I FOR ATIO (Note 1)
ORDER PART VCC, VOUT to GND .. –0.3V to 6.5V NUMBER RFIN Voltage ..(VCC ± 1.3V) to 7V TOP VIEW SHDN Voltage to GND .. –0.3V to (VCC + 0.3V) LTC5508ESC6 SHDN 1 6 RF I IN VOUT .. 5mA GND 2 5 GND Operating Temperature Range (Note 2) .. – 40°C to 85°C V 4 V OUT 3 CC Maximum Junction Temperature ... 125°C SC6 PART SC6 PACKAGE Storage Temperature Range .. – 65°C to 150°C 6-LEAD PLASTIC SC70 MARKING Lead Temperature (Soldering, 10 sec)... 300°C TJMAX = 125°C, θJA = 256°C/W LAAD Consult LTC Marketing for parts specified with wider operating temperature ranges.
ELECTRICAL CHARACTERISTICS The

denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25
°
C. VCC = 3.6V, SHDN = VCC = HI, SHDN = 0V = LO, RF Input Signal is Off, unless otherwise noted. PARAMETER CONDITIONS MIN TYP MAX UNITS
VCC Operating Voltage ● 2.7 6 V IVCC Shutdown Current SHDN = LO ● 2 µA IVCC Operating Current SHDN = HI, IVOUT = 0mA ● 0.55 0.85 mA VOUT VOL (No RF Input) RLOAD = 2k, SHDN = HI, Enabled 150 250 400 mV SHDN = LOW, Disabled 1 mV VOUT Output Current VOUT = 1.75V, VCC = 2.7V, ∆VOUT = 10mV ● 1 2 mA VOUT Enable Time SHDN = HI, CLOAD = 33pF, RLOAD = 2k ● 8 20 µs VOUT Bandwidth CLOAD = 33pF, RLOAD = 2k (Note 4) 2 MHz VOUT Load Capacitance (Note 6) ● 33 pF VOUT Slew Rate VRFIN = 2V Step, CLOAD = 33pF, RLOAD = 2k (Note 3) 5 V/µs VOUT Noise VCC = 3V, Noise BW = 1.5MHz, 50Ω RF Input Termination 2 mVP-P SHDN Voltage, Chip Disabled VCC = 2.7V to 6V ● 0.35 V SHDN Voltage, Chip Enabled VCC = 2.7V to 6V ● 1.4 V SHDN Input Current SHDN = 3.6V ● 24 40 µA RFIN Input Frequency Range 300 to 7000 MHz RFIN Input Power Range RF Frequency = 300MHz to 7GHz (Note 5, 6) VCC = 2.7V to 6V –32 to 12 dBm RFIN AC Input Resistance F = 1000MHz, Pin = –25dBm 150 Ω RFIN Input Shunt Capacitance F = 1000MHz, Pin = –25dBm 0.6 pF
Note 1:
Absolute Maximum Ratings are those values beyond which the life
Note 3:
The rise time at VOUT is measured between 0.5V and 1.5V. of a device may be impaired.
Note 4:
Bandwidth is calculated using the 10% to 90% rise time equation:
Note 2:
Specifications over the –40°C to 85°C operating temperature BW = 0.35/rise time. range are assured by design, characterization and correlation with
Note 5:
RF performance is tested at 1800MHz statistical process controls.
Note 6:
Guaranteed by design. 5508fa 2