Datasheet LTC1151 (Analog Devices)

FabricanteAnalog Devices
DescripciónDual ±15V Zero-Drift Operational Amplifier
Páginas / Página12 / 1 — FEATURES. DESCRIPTIO. APPLICATIO S. TYPICAL APPLICATIO. 15V Dual …
Formato / tamaño de archivoPDF / 190 Kb
Idioma del documentoInglés

FEATURES. DESCRIPTIO. APPLICATIO S. TYPICAL APPLICATIO. 15V Dual Thermocouple Amplifier. Noise Spectrum

Datasheet LTC1151 Analog Devices

Línea de modelo para esta hoja de datos

Versión de texto del documento

LTC1151 Dual ±15V Zero-Drift Operational Amplifier
U FEATURES DESCRIPTIO
■ Maximum Offset Voltage Drift: 0.05µV/°C The LTC®1151 is a high voltage, high performance dual ■ High Voltage Operation: ±18V zero-drift operational amplifier. The two sample-and-hold ■ No External Components Required capacitors per amplifier required externally by other chop- ■ Maximum Offset Voltage: 5µV per amplifiers are integrated on-chip. The LTC1151 also ■ Low Noise: 1.5µV incorporates proprietary high voltage CMOS structures P-P (0.1Hz to 10Hz) ■ Minimum Voltage Gain: 125dB which allow operation at up to 36V total supply voltage. ■ Minimum CMRR: 106dB The LTC1151 has a typical offset voltage of 0.5µV, ■ Minimum PSRR: 110dB drift of 0.01µV/°C, 0.1Hz to 10Hz input noise voltage of ■ Low Supply Current: 0.9mA/Amplifier 1.5µVP-P, and a typical voltage gain of 140dB. It has a slew ■ Single Supply Operation: 4.75V to 36V rate of 3V/µs and a gain-bandwidth product of 2.5MHz ■ Input Common Mode Range Includes Ground with a supply current of 0.9mA per amplifier. Overload ■ Typical Overload Recovery Time: 20ms recovery times from positive and negative saturation are ■ Available in 8-Lead N8 and 16-Lead SW Packages 3ms and 20ms, respectively.
U APPLICATIO S
The LTC1151 is available in a standard 8-lead plastic DIP package as well as a 16-lead wide body SO. The LTC1151 ■ Strain Gauge Amplifiers is pin compatible with industry-standard dual op amps ■ Instrumentation Amplifiers and runs from standard ±15V supplies, allowing it to plug ■ Electronic Scales in to most standard bipolar op amp sockets while offering ■ Medical Instrumentation significant improvement in DC performance. ■ Thermocouple Amplifiers , LTC and LT are registered trademarks of Linear Technology Corporation. ■ High Resolution Data Acquisition All other trademarks are the property of their respective owners.
U TYPICAL APPLICATIO
±
15V Dual Thermocouple Amplifier Noise Spectrum
51Ω 100Ω* 240k 15V 60 50 0.1µF 0.1µF √Hz) 6 40 15V – 8 1/2 7 OUTPUT A LTC1151 30 100mV/°C 2k 7 – + 5 VIN K + LT1025 20 3 VO 51Ω 100Ω* 240k NOISE VOLTAGE (nV/ R– GND 10 470k TYPE K 4 5 0 –15V 2 – 0.1µF 1 10 100 1k 10k 1/2 1 OUTPUT B FREQUENCY (Hz) LTC1151 100mV/°C 2k – + 1151 TA02 3 + 4 0.1µF TYPE K –15V * FULL SCALE TRIM: TRIM FOR 10.0V OUTPUT 1151 TA01 WITH THERMOCOUPLE AT 100°C 1151fa 1