Datasheet LT3668 (Analog Devices)

FabricanteAnalog Devices
Descripción40V 400mA Step-Down Switching Regulator with Dual Fault Protected Tracking LDOs
Páginas / Página28 / 1 — FEATURES. DESCRIPTION. Dual Low Dropout Linear Tracking Regulators. 200mA …
Formato / tamaño de archivoPDF / 386 Kb
Idioma del documentoInglés

FEATURES. DESCRIPTION. Dual Low Dropout Linear Tracking Regulators. 200mA Outputs with Programmable Current Limits

Datasheet LT3668 Analog Devices

Línea de modelo para esta hoja de datos

Versión de texto del documento

LT3668 40V 400mA Step-Down Switching Regulator with Dual Fault Protected Tracking LDOs
FEATURES DESCRIPTION
n
Dual Low Dropout Linear Tracking Regulators
The LT®3668 is a monolithic triple power supply composed n
200mA Outputs with Programmable Current Limits
of a 400mA buck switching regulator and two 200mA low n
1.6V to 45V Input Range
dropout linear tracking regulators (LDOs).This provides a n
Fault Protected to ±45V
complete and robust power solution for applications that n
Triple Output Supply from a Single Input Requires
require the power supply of a sensor to tightly track the
Only One Inductor
power supply of a measurement ASIC. n
IQ = 50μA at 12VIN to 6V and 5V with No Load
Each tracking LDO supplies 200mA of output current with n
Buck Regulator:
a typical dropout voltage of 340mV, and each LDO has an n
Low Ripple (<15mVP-P) Burst Mode
®
Operation
accurate resistor programmable current limit. n
400mA Output with Internal Power Switch
n
4.3V to 40V Input Operation Range (60V Max)
Internal protection circuitry includes reverse-battery n Adjustable 250kHz to 2.2MHz Switching Frequency protection, current limiting, thermal limiting and reverse n current protection. Power Good Indicator n Available in a Thermally-Enhanced 16-Lead The buck regulator includes a high efficiency switch, a MSOP Package boost diode, and the necessary oscillator, control and logic circuitry. Current mode topology is used for fast
APPLICATIONS
transient response and good loop stability. Low ripple n Burst Mode operation maintains high efficiency at low Fault-Protected Sensor Supply n output currents while keeping output ripple below 15mV Automotive and Industrial Supplies n in a typical application. Power for Portable Instrumentation L, LT, LTC, LTM, Burst Mode, Linear Technology and the Linear logo are registered trademarks The LT3668 is available in a thermally-enhanced 16-lead of Linear Technology Corporation. All other trademarks are the property of their respective MSOP package with exposed pad for low thermal resistance. owners.
TYPICAL APPLICATION
VIN
No-Load Supply Current
7V TO 40V 100 TRANSIENT 4.7µF TO 60V IN1 BOOST 0.22µF 27µH 6V 90 SW 100mA 80 232k 22µF ON OFF EN DA 70 PG LT3668 IN3/BD 931k 60 RT IN2 22pF f = 600kHz 174k FB1 50 294k 40 ADJ2 30 5V ADJ3 SUPPLY CURRENT (µA) 150mA 5V 20 OUT2 OUT3 (FOLLOWS 150mA OUT3) 10µF EN2/ILIM2 GND EN3/ILIM3 10µF 10 0 3668 TA01a 5 10 15 20 25 30 35 INPUT VOLTAGE (V) 3668 TA01b 3668fa For more information www.linear.com/LT3668 1 Document Outline Features Applications Description Typical Application Typical Performance Characteristics Pin Functions Block Diagram Operation Applications Information Typical Application Related Parts