Datasheet LT1192 (Analog Devices)

FabricanteAnalog Devices
DescripciónUltrahigh Speed Operational Amplifier
Páginas / Página12 / 1 — FEATURES. DESCRIPTIO. APPLICATIO S. TYPICAL APPLICATIO. Double Terminated …
Formato / tamaño de archivoPDF / 259 Kb
Idioma del documentoInglés

FEATURES. DESCRIPTIO. APPLICATIO S. TYPICAL APPLICATIO. Double Terminated Cable Driver. Inverter Pulse Response

Datasheet LT1192 Analog Devices

Línea de modelo para esta hoja de datos

Versión de texto del documento

LT1192 Ultrahigh Speed Operational Amplifier
U FEATURES DESCRIPTIO
■ Gain Bandwidth Product, AV = 5: 350MHz The LT1192 is a video operational amplifier optimized for ■ Slew Rate: 450V/µs operation on ±5V and a single 5V supply. Unlike many ■ Low Cost high speed amplifiers, this amplifier features high open- ■ Output Current: ±50mA loop gain, over 100dB, and the ability to drive heavy loads ■ Settling Time: 90ns to 0.1% to a full-power bandwidth of 20MHz at 7VP-P. In addition ■ Differential Gain Error: 0.1% (RL = 1k) to its very fast slew rate, the LT1192 has a high gain ■ Differential Phase Error: 0.01° (RL = 1k) bandwidth of 350MHz and is compensated for a closed- ■ High Open-Loop Gain: 100V/mV Min loop gain of 5 or greater. ■ Single Supply 5V Operation ■ Output Shutdown Because the LT1192 is a true operational amplifier, it is an ideal choice for wideband signal conditioning, active fil-
U
ters, and applications requiring speed, accuracy and low
APPLICATIO S
cost. ■ Video Cable Drivers ■ Video Signal Processing The LT1192 is available in 8-pin PDIP and SO packages ■ Photo Diode Amplifier with standard pinouts. The normally unused Pin 5 is used ■ Pulse Amplifiers for a shutdown feature that shuts off the output and ■ D/A Current to Voltage Conversion reduces power dissipation to a mere 15mW. , LTC and LT are registered trademarks of Linear Technology Corporation.
U TYPICAL APPLICATIO Double Terminated Cable Driver Inverter Pulse Response
5V 3 + 7 CABLE 6 75Ω LT1192 2 – 4 75Ω –5V 100Ω 910Ω –3dB BANDWIDTH = 55MHz LT1192 • TA01 LT1192 • TA02 AV = – 5, CL = 10pF SCOPE PROBE 1